Philmore 30-10725 SPDT ON-OFF-ON Green Lighted, Round Paddle Lever Toggle Switch 10A @ 125V AC, 6A @ 250V AC.

NOTE**: This Lighted Switch has a Green LED Lamp in end of the Toggle Lever. This LED Lamp is Rated at 2 Volts @ 20mA. A Resistor is needed for other voltages (See table below).

 This Switch has 2 Positions: MAINTAINED ON on one side, MAINTAINED OFF in the center & MAINTAINED ON on the other side.

Specifications:

• Switch Action: SPDT ON-OFF-ON, Maintained
• Actuator: Black Paddle with GREEN LED
• Initial Contact Resistance: <50meg ohms="">
  
• Insulation Resistance: >100Meg Ohms
• Dielectric Strength (Open Contacts): >1500V for 1 minute
• Contact Material: Silver Plated Brass
• Terminal Material: Copper Alloy
• Body Material: Nylon (UL 94V-2)
• Actuator & Bezel: Nylon (UL 94V-2)
• Terminal Type: Solder Connection
• Mounting Hardware: M18 P1.0
• Lamp Color: Red
• Lamp Voltage: LED 2V* @20ma (*resistor needed for other voltages)
• Mounting Hole Size: 18mm x 16.7mm "Double Flatted" or 18mm Round Hole

 

**Typical Resistor Values Based on Voltage (*AC Voltages require a diode in series):

• 5V DC = 150 Ohms
• 6V DC = 180 Ohms
• 12V DC = 470 Ohms
• 24V DC = 1,200 Ohms
• 6V AC* = 82 Ohms
• 12V AC* = 220 Ohms
• 24V AC* = 560 Ohms
• 48V AC* = 1,200 Ohms
• 117V AC* = 3,000 Ohms