** Representative Image Actual Product May Vary **
Description
BRAND NEW IN BOX
FITMENTS :
2003 - 2007 For Mitsubishi Lancer Evolution 4G63
PRODUCT DESCRIPTION :
Metal Head Gaskets
SMG/K 4G63(4-9) T=1.6
This kit includes: Head Gasket, exhaust manifold, throttle and intake manifold gaskets.
Metal Head Gaskets
SMG/K 4G63(4-9) T=1.6
This kit includes: Head Gasket, exhaust manifold, throttle and intake manifold gaskets.
Features :
GROMMET TYPE HEAD GASKET
FA20 engine tuning through turbo and supercharging is becoming more and more popular. In these cases, many people will eventually experience the issue of head gasket failure. To address this, HKS is pleased to announce the release of a new grommet type head gasket which takes things a step further than the existing stopper type gaskets.
STOPPER TYPE HEAD GASKET
A high pressure seal is formed around the combustion chamber through the use of stoppers which create a step within the gasket for optimum sealing. By making the stopper part of the plate also allows the fold to be smaller while maintaining structural integrity. One side of the plate is completely flat meaning that it can be layered with the stopper to allow stoppers to be used in even the tightest of locations around the combustion chamber forming a high quality seal. Compared with other gaskets of the same thickness, there are more layers in these gaskets giving flexibility which allows the gasket to maintain a good seal even when the engine tries to vibrate and move.
Opposed Bead Stopper Type
If you don't have to worry about the distortion, you can use this to improve the sealing. This type is much better than bead type in matter of sealing. Opposed bead stopper type provide more balance in surface pressure.
Independent warter hole type
Water holes and Head Bolt holes have "independent bead" that is the mainstream technology in motor racing. It reduces possibility of overheating even combustion gas leakage due to high horsepower. Because of the new design of bead shape around Head Bolt hole and water hole, crack around Head Bolt hole will be prevented.
BEAD TYPE HEAD GASKET
A bead is a type of spring used to maintain surface pressure which is very well suited to head gasket use. The beads are laid out to provide optimum pressure and seal around the combustion chamber. By carefully designing and adjusting the bead shape and heights, precise control of surface pressure is achieved for optimum results. Using a combination of 3 different types of beads allows maximum efficiency and performance.
GROMMET TYPE HEAD GASKET
FA20 engine tuning through turbo and supercharging is becoming more and more popular. In these cases, many people will eventually experience the issue of head gasket failure. To address this, HKS is pleased to announce the release of a new grommet type head gasket which takes things a step further than the existing stopper type gaskets.
STOPPER TYPE HEAD GASKET
A high pressure seal is formed around the combustion chamber through the use of stoppers which create a step within the gasket for optimum sealing. By making the stopper part of the plate also allows the fold to be smaller while maintaining structural integrity. One side of the plate is completely flat meaning that it can be layered with the stopper to allow stoppers to be used in even the tightest of locations around the combustion chamber forming a high quality seal. Compared with other gaskets of the same thickness, there are more layers in these gaskets giving flexibility which allows the gasket to maintain a good seal even when the engine tries to vibrate and move.
Opposed Bead Stopper Type
If you don't have to worry about the distortion, you can use this to improve the sealing. This type is much better than bead type in matter of sealing. Opposed bead stopper type provide more balance in surface pressure.
Independent warter hole type
Water holes and Head Bolt holes have "independent bead" that is the mainstream technology in motor racing. It reduces possibility of overheating even combustion gas leakage due to high horsepower. Because of the new design of bead shape around Head Bolt hole and water hole, crack around Head Bolt hole will be prevented.
BEAD TYPE HEAD GASKET
A bead is a type of spring used to maintain surface pressure which is very well suited to head gasket use. The beads are laid out to provide optimum pressure and seal around the combustion chamber. By carefully designing and adjusting the bead shape and heights, precise control of surface pressure is achieved for optimum results. Using a combination of 3 different types of beads allows maximum efficiency and performance.
ABOUT THE MANUFACTURES :
HKS is one of leading manufacturers of performance automotive parts. It offers a comprehensive line of superior quality coilovers, downpipes, transmissions, drop-in filters, pistons, superchargers, and more. The purpose of the company's foundation was to manufacture performance engine components and turbo kits which surpass OE parts. HKS pioneered the Japanese aftermarket performance industry by offering the first commercially available electronic turbo timer and boost controller. Our company, BP honors manufacturer warranty. Any item you purchase with us will be unique and comes with manufacturer warranty. Contact us for any question you may have.
Ask us about saving money with our PACKAGE DEALS CP Cometic ACL Ferrea and ARP Kits Custom Made Package Deals 
AEM Package Deals Package Deals 
Ask us about combining purchases for package deal auctions- Pistons
- Rods
- Bearings
- Head and Main Studs
- and more...
| Ask us about saving money with our PACKAGE DEALS | |
| CP Cometic ACL Ferrea and ARP Kits | Custom Made Package Deals |
| |
| AEM Package Deals | Package Deals |
| Ask us about combining purchases for package deal auctions
|
Shipping
- We ship via UPS/USPS/FEDEX/ONTRAC ground depending on the address of buyer unless instructed to do differently.
- We also offer expedited shipping at an extra cost.
- International shipping rate applies to addresses in all other locations
- Custom/duty/brokerage fees, if any, on Canada and international orders are the responsibility of the buyer.
- Item ships within one business day after the payment has cleared or same day if paid by 12pm PST unless additional handling stated. Item purchased is shipped from West or East Coast Warehouses of ours depending on availability.
- There's a shipping surcharge for shipments going to USPS PO Boxes, AF/APO boxes and any address that is out of 48 lower states. Please contact prior to get a shipping quote.
- We strive to ship your order in a prompt manner to meet the criteria for shipping time that we specify in the Item information.
- Ebay Promotional Shipping is good for shipments going to 48 lower states only.
- We offer a variety of shipping options based on what product you are purchasing and your desired time frame for delivery to meet the needs of all of our customers.
- Shipping charges are non-refundable.
- We will gladly combine shipping charges to one charged based on the total weight of the package. OFE
- We ship via UPS/USPS/FEDEX/ONTRAC ground depending on the address of buyer unless instructed to do differently.
- We also offer expedited shipping at an extra cost.
- International shipping rate applies to addresses in all other locations
- Custom/duty/brokerage fees, if any, on Canada and international orders are the responsibility of the buyer.
- Item ships within one business day after the payment has cleared or same day if paid by 12pm PST unless additional handling stated. Item purchased is shipped from West or East Coast Warehouses of ours depending on availability.
- There's a shipping surcharge for shipments going to USPS PO Boxes, AF/APO boxes and any address that is out of 48 lower states. Please contact prior to get a shipping quote.
- We strive to ship your order in a prompt manner to meet the criteria for shipping time that we specify in the Item information.
- Ebay Promotional Shipping is good for shipments going to 48 lower states only.
- We offer a variety of shipping options based on what product you are purchasing and your desired time frame for delivery to meet the needs of all of our customers.
- Shipping charges are non-refundable.
- We will gladly combine shipping charges to one charged based on the total weight of the package. OFE
Payment & Return
- We require that all payments be paid through PayPal. Your address must be confirmed. Buyers who pay with unconfirmed addresses will not be accepted.
- Per our return policy this item can be returned in 30 days, buyer is responsible for the return shipping, 20% restocking fee may apply.
- International Buyers, please contact us before bidding to discuss the shipping cost.
- We always look to satisfy our customers in whatever needs they may have. If you have any issue with your transaction, before filing any dispute, please contact us to resolve and we will do our best to resolve the issue through eBay as soon as possible. Please contact us if you have any question.
If you have any issue with your transaction, before filing any dispute, please contact us to resolve and we will do our best to resolve the issue through eBay as soon as possible. Please contact us if you have any question.
- We require that all payments be paid through PayPal. Your address must be confirmed. Buyers who pay with unconfirmed addresses will not be accepted.
- Per our return policy this item can be returned in 30 days, buyer is responsible for the return shipping, 20% restocking fee may apply.
- International Buyers, please contact us before bidding to discuss the shipping cost.
- We always look to satisfy our customers in whatever needs they may have. If you have any issue with your transaction, before filing any dispute, please contact us to resolve and we will do our best to resolve the issue through eBay as soon as possible. Please contact us if you have any question.
If you have any issue with your transaction, before filing any dispute, please contact us to resolve and we will do our best to resolve the issue through eBay as soon as possible. Please contact us if you have any question.