OWON SDS1104 Digital Storage Oscilloscope 4 Channels 100MHz 1GSa/s Low Background Noise Deep Memory LCD Display Scopemeter Scope Meter
Features:
1.This is a super-economical type digital storage oscilloscope.
2. The 2-channel oscilloscope has 100MHz bandwidth, 1GS/s smple rate.
3. Ultra-thin body, designed with 7-inch high resolution LCD.
4.Application for electronic circuit debugging, circuit testing, design and manufacture, education and training, automobile maintenance and testing
Specifications:
Performance Characteristics | Instruction | |
Sample rate (real time) | Four CH | 250 MSa/s |
Dual CH* | 500 MSa/s | |
Single CH | 1 GSa/s | |
Waveform capture rate | 45,000 wfms/s | |
Display | 8" color LCD, TFT display , 800×600 pixels | |
Channel | 4 | |
Max record length | When four channels are turned on, the max record length is 10M; and max 20M for two channels; max 40M for one channel. | |
Sampling rate / relay time accuracy | ±2.5 ppm max (Ta = +25℃) | |
Input coupling | DC, AC, Ground | |
Input impedance | 1MΩ±2%,in parallel with 15pF±5pF | |
Max input voltage | 400 V (DC + AC Peak) | |
DC gain accuracy | 1 mV | ±4% |
≥ 2 mV | ±3% | |
Vertical sensitivity | 1 mV/div - 10 V/div | |
Trigger type | Edge, Video, Pulse, Slope, Runt, Windows, Timeout, Nth Edge, Logic, I2C, SPI, RS232, CAN (optional) | |
Decoding Type (optional) | RS232, I2C, SPI, CAN | |
Trigger mode | Auto, Normal, Single | |
Line/field frequency (Video) | Support standard NTSC, PAL and SECAM | |
Automatic measurement | Period, Frequency, Mean, PK-PK, RMS, Max, Min, Top, Base, Amplitude, Overshoot, Preshoot, Rise Time, Fall Time, +Pulse Width, -Pulse Width, +Duty Cycle, -Duty Cycle, Delay A→B, Delay A→B, Cycle RMS, Cursor RMS, Screen Duty, Phase A→B, Phase A→B, +Pulse Count, -Pulse Count, Rise Edge Count, Fall Edge Count, Area, and Cycle Area. | |
Waveform math | +, -, *, / ,FFT, FFTrms, Intg, Diff, Sqrt, User Defined Function, | |
Waveform storage | 100 waveforms | |
Communication interface | Standard | USB host, USB device, Trig Out (Pass/Fail), LAN |
Optional | VGA | |
Printer compatibility | PictBridge | |
Power supply | 100V - 240 VACRMS, 50/60 Hz, CAT Ⅱ | |
Fuse | 2 A, T class, 250 V | |
Battery (optional) | 3.7V, 13200mAh | |
Touch screen (optional) | Multi-touch capacitive touch screen | |
* Max Sample rate (real time) for Dual CH should meet either following condition:
| ||
Waveform Generator (Dual channels AG is optional) | ||
Max frequency output | 25 MHz | |
Sample rate | 125 MSa/s | |
Channel | 1 or 2 | |
Vertical resolution | 14 bits | |
Amplitude range | 2 mVpp - 6 Vpp | |
Waveform length | 8K | |
Standard waveforms | Sine, Square, Ramp, and Pulse | |
Arbitrary waveforms | Exponential Rise, Exponential Fall, Sin(x)/x, Step Wave, Noise, and others, total 46 built-in waveforms, and user-defined arbitrary waveform |
Multimeter (Optional) | |
Full scale reading | 3¾ digits (Max 4000 count) |
Diode | 0 V - 1 V |
Input impedance | 10 MΩ |
On/off measurement | <50(±30)Ω beeping |
Capacitance | 51.2nF - 100uF: ±(3%±3 digits) |
Voltage | DCV: 400mV, 4V, 40V, 400V, 1000V: ±(1%±1digit) Max. input: DC 1000V ACV: 400mV, 4V, 40V, 400V: ±(1%±3digit) 750V: ±(1.5%±3digit) Frequency: 40Hz - 400Hz, Max. input: AC 750V (virtual value) |
Current | DCA: 40mA, 400mA: ±(1.5%±1 digit) 4A, 10A: ±(3%±3digit) ACA: 40mA: ±(1.5%±3digit) 400mA: ±(2%±1digit) 4A, 10A: ±(3%±3digit) |
Impedance | 400Ω: ±(1%±3digit) 4KΩ~4MΩ: ±(1%±1digit) 40MΩ: ±(1.5%±3digit) |