eBay

MTC Motorsport Mercedes A Class Front Mount Bar and Plate Intercooler

We have engineered these intercoolers using a bar and plate core matched to our flowed cast end tanks. This is the most efficient way to keep the intake temperatures low.

The MTC intercooler features a massive competition core (110% more volume than stock) with flowed cast end tanks and increases the surface area
Pressure tested to 3 bar, these intercoolers are proven to handle over 500bhp
This intercooler weighs around 12kg and provides 110% more volume and 25% more surface area than the standard intercooler.
The intercooler is finished powder coated in black

We have tested our intercoolers and found they have absolutely fantastic results. The IAT compared to the standard intercooler are reduced massively which means you get consistent increased performance especially on tuned vehicles.

The standard intercooler and the MTC intercooler both had similar intercooler intake temperatures at around 90 degrees through 5 runs in winter.

At the other side of the intercooler into the engine the standard intercooler temperatures were not great at 48-52 degrees whereas the MTC intercooler temperatures were between 24-26 degrees over 5 runs.

The intercooler will fit plug and play with the following vehicles:

Mercedes A160 1.6L 75KW/102PS (2016+)
Mercedes A180 1.6L 90KW/122PS (2012+)
Mercedes A200 1.6L 115KW/156PS (2012+)
Mercedes A220 2.0L 135KW/184PS (2016+)
Mercedes A250 2.0L 155-160KW/211-218PS (2012+)
Mercedes A180 CDI 1.8L 80KW/108PS (2012-2014)
Mercedes A200 CDI 1.8L 100KW/136PS (2012-2014)
Mercedes A200 CDI 2.2L 100KW/136PS (2014+)
Mercedes A220 CDI 2.2L 125KW/170PS (2012+)
Mercedes CLA180 1.6L 90KW/122PS (2013+)
Mercedes CLA200 1.6L 115KW/156PS (2013+)
Mercedes CLA220 2.0L 135KW/184PS (2016+)
Mercedes CLA250 2.0L 155-160KW/211-218PS (2013+)
Mercedes CLA220 CDI 2.2L 125KW/170PS (2013+)
Mercedes B160 1.6L 75KW/102PS (2015+)
Mercedes B180 1.6L 90KW/122PS (2011+)
Mercedes B200 1.6L 115KW/156PS (2011+)
Mercedes B220 2.0L 135KW/184PS (2015+)
Mercedes B250 2.0L 155KW/211PS (2015+)
Mercedes B180 CDI 1.8L 80KW/108PS (2011-2014)
Mercedes B200 CDI 1.8L 100KW/136PS (2011-2014)
Mercedes B200 CDI 2.2L 100KW/136PS (2014+)
Mercedes B220 CDI 2.2L 125KW/170PS (2011+)

The intercooler fits to the standard hoses perfectly and the standard clips on the car are fine to re-use. Professional installation is recommended and should take approximately 2-3 hours.

We would go as far as to say this is the best intercooler on the market for these models.