Brand New SPACER for Toyota MR2 MAF SENSOR
Want a little more performance out of your ride or have a check engine light for a MAF code and tried MAC cleaner and still didn’t work? Then you may need a performance enhancing MAF Sensor Spacer.
This device spaces out your existing Mass Air Flow Meter (MAF) to give you additional HP and mpg and has the ability to help elimate those pesky Check Engine lights in certain scenarios (letting your pass that emissions test).
Purposely designed for the engine to operate more efficiently and effectively towards its full potential. This is different than ECU remapping or any similar tuning method, where it pushes the engine beyond its capacity where further modifications or replacement of the other parts will be required to sustain the new configurations. This device leverages your computers built in thresholds for air mass to allow your stock computer to adjust its mappings into safe thresholds of operation that are already programmed into your car by the manufacturer.
This unit will do 3 things for your vehicle - Increase Gas Mileage, Improve Horsepower and Reduce Emission.
Increase fuel economy and power about +/- 8% in minutes with a decrease in exhaust emissions, and provide an improvement in horsepower and acceleration! - Use this mod on your cars stock tune without voiding your warranty. (Easy Remove if you need to service your vehicle.)
By utilizing our MAF sensor spacer it adjusts the spacing in your sensor location which ultimately tricks the computer of the car into adjusting its fuel mixture ratio. This is no different than getting a tune done on your car, but for those who just want the benefits of a light Tune without the cost, this is a cheap way to achieve the same results.
Note: This is not for use on vehicles that already have a tune.
Too much fuel lowers horse power so changing the air fuel ratio will improve the power. And increasing the ignition timing also contributes to its enhancement. This is what is done in a stage one tune and this is what a MAF Spacer does on its implementation. Also, this method is very sustainable as a MAF Spacer only improves the engine towards 100% of capacity without running lean.
The spacer is made of ABS material. It is durable, resistant to high temperature and weather conditions.
Click below
Want a design that isn't listed? Send us message with an idea, pictures of your proposed design and we will see what we can do!
Brand New SPACER for Toyota MR2 MAF SENSOR
Want a little more performance out of your ride or have a check engine light for a MAF code and tried MAC cleaner and still didn’t work? Then you may need a performance enhancing MAF Sensor Spacer.
This device spaces out your existing Mass Air Flow Meter (MAF) to give you additional HP and mpg and has the ability to help elimate those pesky Check Engine lights in certain scenarios (letting your pass that emissions test).
Purposely designed for the engine to operate more efficiently and effectively towards its full potential. This is different than ECU remapping or any similar tuning method, where it pushes the engine beyond its capacity where further modifications or replacement of the other parts will be required to sustain the new configurations. This device leverages your computers built in thresholds for air mass to allow your stock computer to adjust its mappings into safe thresholds of operation that are already programmed into your car by the manufacturer.
This unit will do 3 things for your vehicle - Increase Gas Mileage, Improve Horsepower and Reduce Emission.
Increase fuel economy and power about +/- 8% in minutes with a decrease in exhaust emissions, and provide an improvement in horsepower and acceleration! - Use this mod on your cars stock tune without voiding your warranty. (Easy Remove if you need to service your vehicle.)
By utilizing our MAF sensor spacer it adjusts the spacing in your sensor location which ultimately tricks the computer of the car into adjusting its fuel mixture ratio. This is no different than getting a tune done on your car, but for those who just want the benefits of a light Tune without the cost, this is a cheap way to achieve the same results.
Note: This is not for use on vehicles that already have a tune.
Too much fuel lowers horse power so changing the air fuel ratio will improve the power. And increasing the ignition timing also contributes to its enhancement. This is what is done in a stage one tune and this is what a MAF Spacer does on its implementation. Also, this method is very sustainable as a MAF Spacer only improves the engine towards 100% of capacity without running lean.
The spacer is made of ABS material. It is durable, resistant to high temperature and weather conditions.
Click below
Want a design that isn't listed? Send us message with an idea, pictures of your proposed design and we will see what we can do!
We accept
Terms of Sale
We committed to provide good quality products to our customers.
1. For non-received items over the estimate delivery day, we will refund or resend for free.
2. For defective items: While using the product, you encounter quality issues, we will refund or exchange for free.
3. If you don't like an item within 30 days after received, we can exchange or refund the item, under the promise of never used and could sell out next time. Customer should return the item and is responsible for return postage.
1. For non-received items over the estimate delivery day, we will refund or resend for free.
2. For defective items: While using the product, you encounter quality issues, we will refund or exchange for free.
3. If you don't like an item within 30 days after received, we can exchange or refund the item, under the promise of never used and could sell out next time. Customer should return the item and is responsible for return postage.
Shipping information
1. We send our packages to Europe and USA. Any non-received items caused by invalid address registered are not in our full refund or replacement policy.
2. We dispatch all orders within 1 working days. All items will be shipped from Cardiff .
3. Delivery time in the United Kingdom, often takes about 2-3 business days.