RCA to 1/4" Mono Jack Cable Gold Phono Lead Van Damme Dual Shielded Cable

Great sound quality, robustness, that is what you will get from this lead. We have used Van Damme Cable and Neutrik/Rean Connectors which are an extremely well respected combination where high quality sound and robustness is needed.

We use 4 percent silver lead free solder to match the silver plating within the cable.

Can be used to link any audio media device such as audio interfaces, DJ Decks DJ Mixers, etc that have RCA/Jack input/output on them. 

Note this is for a single lead so you will need to buy 2 leads if you want to use as a left right combination - you normally will get a discount when buying 2 items. There is an option for different colour cable so you can have a different colour cable for left and right. The specification is identical regardless of cable colour and will sound exactly the same. After two leads? use 'add to basket' and then click on the item once it is in the basket to go back to the listing to choose the second lead.

This lead is made by us. We have been in the industry for over 30 plus years and have vast experience in soldering. We use advanced soldering equipment as well as 4 percent silver solder in its construction.

This is for one lead, sold as a single lead. 

Cable Length - Important

 PLEASE MEASURE UP CAREFULLY TO AVOID ERRORS

 Leads 1m or less (patch leads) will be measured visible cable from the rear boot of the connector. We add 90mm of cable FREE to compensate for the connectors.

 Leads over 1m will be measured cut length of cable. The connectors use up 90mm of cable.

 If you need any specific length or need a little extra please ask - it can be made to that length as these are made to measure when we receive the order. Contact through ebay messages.

 We can make the lead to an exact length if you want - Order the lead that is slightly longer and message us through ebay.

Neutrik Rean Connectors 

We only use genuine connectors. We use NP2X-B Male Gold Jack and NYS373-0 Male Gold RCA. Both connectors have gold contacts, black outer shell and cord grips built inside them to ensure cable stays firmly inside the connectors.

Van Damme Cable Specifications

Van Damme Pro Grade Classic XKE Instrument Cable:

Van Damme cable low capacitance, Oxygen Free silver plated Copper for better sound reproduction over just copper cable, low capacitance. Commonly used for unbalanced input and output audio devices. The cable has excellent noise rejection due to its tight construction dual screens of conductive thermoplastic and close lapped copper screen.

Mechanical Specification
Conductors 3 x 0.20 mm silver plated ultra-pure oxygen-free copper
4 x 0.20 mm bare ultra-pure oxygen-free copper
Conductor size 7 x 0.20 mm, 0.22 mm2, AWG 24/7
Insulation Foamed polyethylene
Screen 1 0.40 mm conductive thermoplastic
Screen 2 80 x 0.10 mm close lap spiral bare oxygen-free copper
Jacket material Flexible PVC/Neoprene composite
Overall diameter 6.00 ± 0.15 mm
Bend radius 10 x overall diameter
Operating temperature -20 to +70 ⁰C

Electrical Specification
Resistance Conductor < 90 Ohm/km
Insulation > 5000 MOhm/km
Capacitance Core to screen 90 pF/m
Please read Terms and conditions of the sale - Buying this item(s) means you accept these terms