Feature:

1) The highly bright blue illumination allows for easy nighttime visibility.

2) This device contains a relay box, it makes more safely when you driving your car.

3) It comes from and security, relaxation box, through the connector to push the start button.

4) We recommend professional person to install.

Installation:

1) Stop the car and shut off the engine.

2) Fix the Start Button to appropriate position.

3) Pass the wire through the partition board and press the starting switch, against the partition board, attach the rubber ring and tighten the nut.

4) Connect the Start Button connector to the Relay Box and Relay Box mounted in the right position.

5) The black wire should be earthed to the mental bodywork of the car or the negative side of the battery.

6) The blue wire should be connected to terminal 15 behind the ignition switch, another one connecting terminal 50 behind the ignition switch.

7) The red wire should be connected to the terminal 15. (The power path that passes through iron)

8) Fix the Relay Box using the double side tap and screws.

To Start the Engine:

Use your key to turn the ignition key on. Press the installed switch to start engine. Release as soon as the engine fires

Please note:

1) Dimensions are measured by hand, there may be small deviations.

2) Due to the different monitor and light effect, the actual color maybe a slight different from the picture color.

3) Use your key to turn the ignition key on before use this product, then press the switch installation start the engine.

4) Please do not press the start button again while the engine is running to avoid boot device fault.