• Pipe Size: 1/4 inch
• Orifice Diameter: 2.5mm
• Voltage: AC 110V
• Material: Brass
• Nominal Diameter: DN8
• Actuator Mode: Electromagnetic Control
• Nc or No: Normally Closed
• Power Source: AC
• Temperature of Media: -5~80℃
• Pressure: 0-1.0Mpa
• Media: Air / Water / Oil
• Model: 2W-025-08
• Structure: Control
• Standard or non standard: Yes
• Brand: Jingrong JR
• Features:
  - Accurate control ability, low fever, suitable for all kinds of working environment.
  - All brass construction, precise threaded interface, thick pipe wall, firm and durable.
  - Two position, two way, normal close switch, magnetic solenoid water valve.
  - Widely used in flow control, liquid control, gas control and multivariate control.
  - Low noise, low vibration, low heating and long service life.
  - Easy to use, can be installed at any angle.
  - High quality all copper explosion-proof coil, high-quality material, Seiko production.
• Thread Type: NPT
• Oil Seal Material: NBR
• Place of Application: Air / Water / Oil
• Note:
  - During installation, please check whether the voltage of solenoid valve is the same as that of power supply (for example, the common voltage of home is AC220 V with AC220 V solenoid valve, if it is DC 24 V and DC 12 V solenoid valve, please configure power supply, and the solenoid valve can be started normally only when the power supply current is 2A or above.
  - The pipeline should be flushed before use. If the medium is not clean and there are impurities, a filter should be installed to prevent impurities from hindering the normal operation of the solenoid valve.
  - The solenoid valve is unidirectional, directional and can not be installed in reverse. The direction of arrow on the valve body is the direction of pipeline fluid movement, which must be consistent.
  - The solenoid valve should be installed horizontally, and the coil should be vertically upward, not vertically or reversely. Wrong installation will affect the service life of the valve. To leakage of solenoid valve or can not be closed.
  - After the out wire (connector) of solenoid valve coil is connected, it should be confirmed whether it is firmly connected, and the contact of electrical components should not shake. If it is loose, the solenoid valve will not work.
  - The impurity inside the valve should be cleaned for a long time.
  -The color of the thread may be different due to different production batches, but it will not affect normal use. Those who mind, buy carefully.

• Package Including:
  
• 1 x Solenoid Valve 110V

• Product Weight: 300 G / 10.58 Ounces
• Product Dimensions (L*W*H): 70*40*40 MM / 2.76*1.57*1.57 Inches
• Package Weight: 300.0 G / 10.58 Ounces
• Package Dimensions (L*W*H): 70*40*40 MM / 2.76*1.57*1.57 Inches
• Retail Packaging: Yes, Colored Box

• 1. When put the order in the awaiting payment,Payment must be paied within 20days.
• 2. We accept payment by Paypal
• 3.Please write down your special requests (color, size, etc.) in the NOTE when you make payment.
• 4.TOTAL AMOUNT includes the final price plus S&H(Shipping and Handling).

• 1. We only ship to eBay confirmed address
• 2. Item will be shipped within 48 hours after payment received, excluding weekends and holidays.
• 3. Most orders are delivered within the stated shipping time at the time of purchase
• 4. Shipping are not available for PO BOX, Parcel locker, Parcel collect
• 5. If you don't receive your shipment within 35 days after payment, please feel free to contact us. We will take proper actions to solve the problem for you

• 1.notify us by message before returning
• 2.Contact us within 30 days of receiving the item