5.83inch E-Paper E-Ink Display HAT For Raspberry Pi, 648×480 Pixels, Black / White Dual-Color, SPI Interface
5.83" E-PAPER HAT

Low Power Consumption, Wide Viewing Angle, Paper-Like Displaying Without Electricity

Ideal for price tags, shelf labels, industrial instruments...

 
  • Size5.83"
  • Resolution648×480
  • Viewing Angle>170°
  • Display ColorBlack / White
  • Grey Scale2
  • CommunicationSPI
  • Display PanelE-paper
  • ExperiencePaper-like
  • EnvironmentAmbient Light Required
  • Display TypePassively Reflective
Features At A Glance
  • No backlight, keeps displaying last content for a long time even when power down
  • Ultra low power consumption, basically power is only required for refreshing
  • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano
  • SPI interface, for connecting with controller boards like Raspberry Pi/Jetson Nano/Arduino/STM32, etc.
  • Onboard voltage translator, compatible with 3.3V / 5V MCUs
  • Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)
Specifications
OPERATING VOLTAGE3.3V/5VDISPLAY COLORblack, white
INTERFACE3-wire SPI, 4-wire SPIGREY SCALE2
OUTLINE DIMENSIONS125.40 × 99.50mmFULL REFRESH TIME5s
DISPLAY SIZE119.232 × 88.320mmREFRESH POWER26.4mW(typ.)
DOT PITCH0.184 × 0.184mmSTANDBY CURRENT<0.01uA (almost none)
RESOLUTION648 × 480 pixelsVIEWING ANGLE>170°

Advantages Of EINK

E-paper display utilizes microcapsule electrophoretic technology for displaying, the principle is: charged particles suspended in clear fluid will move to sides of microcapsule when electric field is applied, making the microcapsule become visible by reflecting ambient light, just as traditional printed paper.
E-paper display will clearly display images/texts under lamplight or natural light, requires no backlight, and features nearly up to 180° viewing angle. It is usually used as e-reader due to its paper-like effect.

Standard Raspberry Pi 40PIN GPIO Header

Compatible With Raspberry Pi Series Boards, Jetson Nano

Raspberry Pi, Jetson Nano in the photo are NOT included.
Onboard SPI Control Interface

For Use With Other Controller Boards Like STM32/Arduino

VCC3.3V/5V
GNDGround
DINSPI MOSI pin
CLKSPI SCK pin
CSSPI chip selection, low active
DCData / Command selection (high for data, low for command)
RSTExternal reset, low active
BUSYBusy status output, high active

* for Arduino UNO, due to its RAM limit, it is better to choose the e-Paper Shield

Application Examples

Suitable For Price Tags, Asset/Equipment Tags, Shelf Labels, Conference Name Tags...

Outline Dimensions
 
Resources & Services

* Resources for different product may vary, please check the wiki page to confirm the actually provided resources.

Selection Guide

PART NUMBERCOLORSGREY SCALERESOLUTIONDISPLAY SIZE (MM)OUTLINE DIMENSION (MM)FULL REFRESH TIME (S)PARTIAL REFRESH1PI HEAD-ER2FLEXI-BLEINTERFACE
1.02inch e-Paper Moduleblack, white2128×8021.76 × 14.0042.0 × 27.02√  SPI
1.54inch e-Paper Moduleblack, white2200×20027.60 × 27.6048.0 × 33.02√  SPI
1.54inch e-Paper Module (B)red, black, white2200×20027.60 × 27.6048.0 × 33.08   SPI
1.54inch e-Paper Module (C)yellow, black, white2152×15227.51 × 27.5148.0 × 33.027   SPI
2.13inch e-Paper HATblack, white2250×12248.55 × 23.7165.0 × 30.22√√ SPI
2.13inch e-Paper HAT (B)red, black, white2212×10448.55 × 23.7165.0 × 30.215 √ SPI
2.13inch e-Paper HAT (C)yellow, black, white2212×10448.55 × 23.7165.0 × 30.215 √ SPI
2.13inch e-Paper HAT (D)black, white2212×10448.55 × 23.7159.2 × 29.22√√√SPI
2.66inch e-Paper Moduleblack, white2296×15230.704 × 60.08837.0 × 83.56√  SPI
2.66inch e-Paper Module (B)red, black, white2296×15230.704 × 60.08837.0 × 83.515   SPI
2.7inch e-Paper HATblack, white4264×17657.29 × 38.1985.0 × 56.06 √ SPI
2.7inch e-Paper HAT (B)red, black, white2264×17657.29 × 38.1985.0 × 56.015 √ SPI
2.9inch e-Paper Moduleblack, white2296×12866.89 × 29.0589.5 × 38.02√  SPI
2.9inch e-Paper Module (B)red, black, white2296×12866.89 × 29.0589.5 × 38.015   SPI
2.9inch e-Paper Module (C)yellow, black, white2296×12866.89 × 29.0589.5 × 38.015   SPI
2.9inch e-Paper HAT (D)black, white2296×12866.90 × 29.0679.0 × 36.72√√√SPI
3.7inch e-Paper HATblack, white4480×28047.32 × 81.1258.0 × 96.53√√ SPI
4.2inch e-Paper Moduleblack, white4400×30084.80 × 63.60103.0 × 78.54   SPI
4.2inch e-Paper Module (B)red, black, white2400×30084.80 × 63.60103.0 × 78.515   SPI
4.2inch e-Paper Module (C)yellow, black, white2400×30084.80 × 63.60103.0 × 78.515   SPI
4.3inch e-Paper UART Moduleblack, white4800×60088.00 × 66.00118.0 × 75.01.5   UART
5.65inch e-Paper Module (F)7-Color2600×448114.9 × 85.8138.5 × 100.515   SPI
5.83inch e-Paper HATblack, white2648×480119.232 × 88.320125.4 × 99.55 √ SPI
5.83inch e-Paper HAT (B)red, black, white2648×480119.232 × 88.320125.4 × 99.520 √ SPI
5.83inch e-Paper HAT (C)yellow, black, white2600×448118.8 × 88.26125.4 × 99.526 √ SPI
6inch e-Paper HATblack, white16800×600122.4 × 90.6138.4 × 101.8<1√√ USB/SPI/
I80
6inch HD e-Paper HATblack, white161448×1072122.4 × 90.6138.4 × 101.8<1√√ USB/SPI/
I80
7.5inch e-Paper HATblack, white2800×480163.20 × 97.92170.2 × 111.25 √ SPI
7.5inch HD e-Paper HATblack, white2880×528163.24 × 97.94170.2 × 111.25 √ SPI
7.5inch e-Paper HAT (B)red, black, white2800×480163.20 × 97.92170.2 × 111.216 √ SPI
7.5inch HD e-Paper HAT (B)red, black, white2880×528163.24 × 97.94170.2 × 111.221 √ SPI
7.5inch e-Paper HAT (C)yellow, black, white2640×384163.20 × 97.92170.2 × 111.216 √ SPI
7.8inch e-Paper HATblack, white161872×1404158.18 × 118.64173.8 × 127.6<1√√ USB/SPI/
I80
9.7inch e-Paper HATblack, white161200×825202.8 × 139.43218.8×156.4<1√√ USB/SPI/
I80
10.3inch e-Paper HATblack, white161872×1404209.66 × 157.25216.7 × 174.4<1√√ USB/SPI/
I80
10.3inch e-Paper HAT (D)black, white161872×1404209.66 × 157.25227.7 × 165.8<1√√√USB/SPI/
I80
12.48inch e-Paper Moduleblack, white21304×984252.98 × 190.90280.0 × 229.5<8 √ SPI
12.48inch e-Paper Module (B)red, black, white21304×984252.98 × 190.90280.0 × 229.5<16 √ SPI
13.3inch e-Paper HATblack, white161600×1200270.40 × 202.80285.80 × 213.65<1√√ USB/SPI/
I80
  1. It usually takes about 0.3s for partial refresh
  2. Pi Header: standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards

e-Paper raw panels comparing

PACKAGE CONTENT

Weight: 0.054 kg

  1. 5.83inch e-Paper x1
  2. e-Paper Driver HAT x1
  3. RPi screws pack (2pcs) x1
  4. PH2.0 20cm 8Pin x1
1
2
3
4