MINI PIR infrared motion sensor switch
PIR (Passive infrared) Motion sensor is pyroelectric device can detect human movement by detecting Infrared ray emitted by human body. Operating voltage is 5~12VDC, and output voltage is equal to input voltage. High sensitivity, easy for installing. Widely used on the Motion-activated lighting, LED strips Security System, automatic sensory device and more.
Specifications:
Passive Infrared Sensor
Operating voltage: DC 5V ~ 12V, Output voltage = input voltage
Load current: < 4A
Delay time: 5~600 Seconds, adjustable(Default setting 5sec)
Detecting range: <90 degrees cone angle
Detecting distance: 0 ~ 5M, adjustable(Default setting 5M)
Size: 50 * 26 * 21.5mm
Trigger way: continuous triggering
Light sensor: NO
Features:
Automatic Induction: When people enter into the range of induction, it will output a voltage equal to input voltage, after the delay time, it will output 0V; during the delay time if motion detected, the delay time will reset, and start a new delay time.
There is no light sensor control.
Note:
Don’t exposed to direct sun light or lighting, big wind, near a heater or air condition.
Don’t fix it at a place where there are obstructing material (eg. Glass, dense clothes) which IR cannot get though.
Don’t fix it in strong shock or vibration environment.
The PIR Sensor requires a "warm-up time" in order to function properly, about 10s to1min,depend on the delay time; during this time, the signal triggered by the module is not stable, after one minute, it will be ready.
The sensitivity for left-right direction is better than up-down direction, make sure the installation direction is left-right.
2Pairs Female&Male Connector
Simply & Professional appearance for power cabling
Easier for camera installation, save time and more securer cable connection
5.5mm x 2.1mm Female power plug connector
Female Jack Description:
No electrical tap, No splicing, no crimping, but only a small screw driver.
Easier for camera installation, save time and more securer cable connection.
5.5mm x 2.1mm Female power plug connector.
External diameter of the plug: 5.5mm.
Internal diameter of the plug: 2.1mm.
Dimension: 38mm(L) x 14mm(W) x 13mm(H).
Male jack Description:
2.1 x 5.5mm CCTV Camera DC Power Plug Connector.
DC Power Plug with plastic construction and strain relief.
This 2.1 x 5.5mm Power Plug features one power connector end DC plug male to another end terminal for CCTV camera connected.
It is a perfect solution for those who want to make custom power cable.
This CCTV Camera DC Power Connector will provide a great connection.
Internal diameter of the plug: 2.1mm
External diameter of the plug: 5.5mm
It measures approx. 1.5" long, 0.55" wide, 0.5" thick.
If you can't receive the product within 2 months (60 days), please contact with us,we promise to payback 100% of your money.
We ensure our products work normally before post.If the products is broken before arrival to you,all you should do is taking a photo to show us our broken product.We promise to payback 100% of your money.
* When you satisfied with our product and services please leave us positive feedback.
* If you have got the package, please confirm "Delivery on time" For us.
* If a problem occurs, contact us immediately with any email request.
* Just contact us using the " Ask the seller a question" link on eBay.