Novol Uni Universal Putty Body Filler Car van Hard Dent Repair 250 g.

UNI basic putty in our range. 

Relatively hard and not very flexible, it is recommended mainly for machine sanding and repairing of small surfaces. 

It has good adhesion to various substrates except galvanized steel.

Applied to substrates such as:

• Polyester laminate  
• Steel 
• Aluminum
• Component acrylic primers 
• Old paint coatings

Colour: Beige  

Mixing ratio: 

• UNI putty - 100 parts by weight 
• Hardener - 2 to 3 parts by weight 

Drying time:

• From 20 to 30 min. At 20 C.      
• VOC limit. (Cat. II / B / b) = 250 g / l    VOC <90 g / l   

Do not apply directly on the ground reactive (wash primers), one-component acrylic and nitrocellulose.      

How to use:

Mix very well until even in colour

Follow the recommended amount of hardener 2-3 : 100 Apply a layer of no more than 3 mm thickness    

The minimum temperature required for application is + 10 C.