2WD Robot Motor Smart Car Kits
1 mechanical structure is simple and very easy to install.
2 car comes with tachometer wires 20 meters, with gun shop photoelectric systems can be quickly formed a gun. It can speed, distance, composed of closed circuit systems.
3 with four cars on the battery compartment, convenient for the whole power system. at the same time provided with a switch, easy start-stop. without further very convenient, so that the entire system is highly integrated
4 auto shop with L298N driver module, four monitoring modules, as well as 51 control unit seamless, simple and good-looking components of the system!
Note:
1.Please allow 1-3mm error due to manual measurement. pls make sure you do not mind before you bid.
2.Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!
Package list:
the car chassis x 1
Car wheels x 2
DC gear motor 2 48: a DC motor deceleration (otherwise 120: 1 Optional)
20 line of code disc Gun x 2
fasteners (high intensity black acrylic) x4
caster x 1
four battery box x 1
A quality Rocker Switch x 1
assembly drawing x 1
V5 shield x 1
UNO R3 x 1
SG90 x 1
FPV x 1
L298N x 1
various screw nut
L298N Motor Drive Controller
L298N as main chip, ST corporation production.Low heat,outstanding anti-interference performance.
High working power to 46v,large current can reach 3A MAX and continue current is 2A, power to 25w.
Can drive one 2-phase stepper motor, one 4-phase stepper motor or two DC motors.
Built-in 78M05,get power from drive power,however, when drive power over12V, please use the external 5v power as power supply.
Large capacity filter capacitance,afterflow protection diode, more stable and reliable.
Double H bridge drive
Chip: L298N (ST NEW)
Logical voltage: 5V
Drive voltage: 5V-35V
Logical current: 0mA-36mA
Drive current: 2A(MAX single bridge)
Max power: 25W
Size:43 x 43 x 26mm
Net weight: 26g
Package weight:36g
1 mechanical structure is simple and very easy to install.
2 car comes with tachometer wires 20 meters, with gun shop photoelectric systems can be quickly formed a gun. It can speed, distance, composed of closed circuit systems.
3 with four cars on the battery compartment, convenient for the whole power system. at the same time provided with a switch, easy start-stop. without further very convenient, so that the entire system is highly integrated
4 auto shop with L298N driver module, four monitoring modules, as well as 51 control unit seamless, simple and good-looking components of the system!
Note:
1.Please allow 1-3mm error due to manual measurement. pls make sure you do not mind before you bid.
2.Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!
Package list:
the car chassis x 1
Car wheels x 2
DC gear motor 2 48: a DC motor deceleration (otherwise 120: 1 Optional)
20 line of code disc Gun x 2
fasteners (high intensity black acrylic) x4
caster x 1
four battery box x 1
A quality Rocker Switch x 1
assembly drawing x 1
V5 shield x 1
UNO R3 x 1
SG90 x 1
FPV x 1
L298N x 1
various screw nut
L298N Motor Drive Controller
L298N as main chip, ST corporation production.Low heat,outstanding anti-interference performance.
High working power to 46v,large current can reach 3A MAX and continue current is 2A, power to 25w.
Can drive one 2-phase stepper motor, one 4-phase stepper motor or two DC motors.
Built-in 78M05,get power from drive power,however, when drive power over12V, please use the external 5v power as power supply.
Large capacity filter capacitance,afterflow protection diode, more stable and reliable.
Double H bridge drive
Chip: L298N (ST NEW)
Logical voltage: 5V
Drive voltage: 5V-35V
Logical current: 0mA-36mA
Drive current: 2A(MAX single bridge)
Max power: 25W
Size:43 x 43 x 26mm
Net weight: 26g
Package weight:36g
Note:
This module has a built-in 5v power supply, when the driving voltage is 7v-35v, this supply is suitable for power supply
DO NOT input voltage to +5v supply interface, however ledding out 5v for external use is available.
When ENA enable IN1 IN2 control OUT1 OUT2
When ENB enable IN3 IN4 control OUT3 OUT4
Package Included:1 x Dual H Bridge DC Stepper Motor Drive Controller Board Module Arduino L298N
V5 Shield
This module has a built-in 5v power supply, when the driving voltage is 7v-35v, this supply is suitable for power supply
DO NOT input voltage to +5v supply interface, however ledding out 5v for external use is available.
When ENA enable IN1 IN2 control OUT1 OUT2
When ENB enable IN3 IN4 control OUT3 OUT4
Package Included:1 x Dual H Bridge DC Stepper Motor Drive Controller Board Module Arduino L298N
V5 Shield
1. Arduino is an open-source physical computing platform based on a simple i/o board and a development environment that implements the Processing/Wiring language.
2. Arduino can be used to develop stand-alone interactive objects or can be connected to software on your computer (e.g. Flash, Processing, MaxMSP).
3. The open-source IDE can be downloaded for free (currently for Mac OS X, Windows, and Linux).
4. Sensor Shield allows you to connect to various modules like sensors, servos, relays, buttons, potentiometers.
5 .Each functional module has buckled port with VCC, GND and Output, which has corresponding port on the Sensor Shield, connected with a plain 2.54mm dual-female cable you may start playing already.
6 .Buckled brick cables are like cement for bricks, make the connections easier, secure and more professional looking.
7. Color: Blue & Black.
8. Item size: 57*57*19mm.
9. Net weight: 26g.
10.Package weight: 35g.
Package Included:1PCS*Sensor Shield V5 V5.0 For Arduino APC220 Bluetooth Analog Module Servo Motor
4 X AA Battery Case
Brand new and high quality.
Battery type: Case Holder for 4 x AA Battery.
AA Battery Holder Case with wire leads for soldering / connecting.
Keep your batteries organized and protected.
Size :58x63x15.5mm
Package included：1 x 4 X AA 6.0V 4AA Plastic Battery Case Storage Box Holder with Wire Leads
Am 19.02.21 hat der Verkäufer die folgenden Angaben hinzugefügt: