Voltage Regulator Rectifier for Suzuki GS 300 / 450 / 650 / 700 / 750 / 1000 / 1100 / 1150 1982-1988 | # 32800-45250

KEY FEATURES
 

Brand new aftermarket voltage regulator rectifier

Improved heat sink and charging capabilities

Higher grade of electric components

Minimal mechanical experience required

All products shipped are tested

DESCRIPTION

 

Battery condition is extremely important. No voltage regulator can work correctly with a bad or weak battery. Always fully charge your battery before performing any charging system tests or replacing parts. If there is any doubt, have the battery load tested or replaced.

Brand New Aftermarket Voltage Regulator Rectifier

  • You must re-install your original connector.
  • Once your connector is re-installed, our part becomes a Plug-and-play unit, direct fit, and easy to install.
  • The Quality exceeds the OEM equipment
  • Improved heat sink and charging capabilities
  • Higher grade of electric components.
  • All products shipped are tested

We have even included the opposite connector (main harness side) as we know these are often melted/corroded/defective and a major cause for repetitive electrical issues.

*All item pictures are accurate, if in doubt do not hesitate and compare our item to your original part.

Vehicle models fitment

 

Suzuki GR 650 Tempter -- 1983
Suzuki GS 1000 -- 1982
Suzuki GS 1100 G -- 1982-1984
Suzuki GS 1100 GK -- 1982-1984
Suzuki GS 1150 E -- 1984-1986
Suzuki GS 1150 ES -- 1983-1986
Suzuki GS 300 L -- 1982-1985
Suzuki GS 450 E -- 1983
Suzuki GS 450 G -- 1982-1983, 1985
Suzuki GS 450 L -- 1983, 1985-1988
Suzuki GS 450 T -- 1983
Suzuki GS 700 E -- 1984-1985
Suzuki GS 700 ES -- 1984-1985
Suzuki GS 750 E -- 1983
Suzuki GS 750 ES -- 1983
Suzuki SP 600 -- 1985
Suzuki XN 850 -- 1983

OEM part replacement

 

32800-00A00
32800-04A00
32800-04A01
32800-09300
32800-09301
32800-40A00
32800-44130
32800-44230
32800-45250

Specifications

 

Dimensions :
Width : 48mm
Length : 75mm
Height: 25mm
Fixation holes center to center : 60mm
Wires length: 250mm

Other specifications :
Number of plugs : 0
Number of pins : 5

instructions

 

Before installing your new voltage regulator rectifier;

  • Check the AC output of the stator.
  • Replace any burned or corroded connectors on stator and regulator/rectifier
  • Check and repair any melted wiring.
  • Use hi-temp dielectric grease on all connectors.