Brand new aftermarket stator
Direct replacement to your original unit. Plug-and-play, direct fit, easy installation.
Highest grade lamination materials
All products shipped are tested
Battery condition is extremely important. No stator can work correctly with a bad or weak battery. Always fully charge your battery before performing any charging system tests or replacing parts. If there is any doubt, have the battery load tested or replaced.
All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part.
Yamaha VK 540 II -- 1993-1998
Yamaha VK 540 III -- 1999-2005
8AT-85560-10-00
8AT-85560-00-00
Dimensions :
Interior diameter : 35mm
Exterior diameter : 100mm
Thickness : 50mm
Length of wires stator to grommet : 15mm
Length of wires grommet to plug : 140mm
Length of pickup coil's wire to grommet : 20mm
Other specifications :
Number of wires : 6
Number of plugs : 2
Number of pins : 6
Wire to wire resistance :
Alternator : White to Yellow = 0.4 ohms +/-20%
Pickup : White/Red to Black = 20 ohms +/-20%
Source 1 : Red to Ground = 1.0 ohms +/-20%
Source 2 : Red to Brown = 280 ohms +/-20%
Before installing your new stator
Our stator may use a different wire color code than your original.
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible no less than 0.010??.
find parts for :