Brand new direct replacement stator
Highest grade lamination materials and highest grade copper windings, resistant to 200 degrees Celsius
Pick up pulsar coil,connector, back plate and rubber grommet included
All products shipped are tested
Battery condition is extremely important. No stator can work correctly with a bad or weak battery. Always fully charge your battery before performing any charging system tests or replacing parts. If there is any doubt, have the battery load tested or replaced.
All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part.
Yamaha Bravo 250 -- 1988-1993
8AE-85560-00-00
83Y-85560-M0-00
Dimensions :
Interior diameter : 35.5 mm
Exterior diameter : 46 mm
Thickness : 5 mm
Length of wires stator to grommet : 120 mm
Length of wires grommet to plug : 160 mm
Length of pickup coil's wire to grommet : 110 mm
Other specifications :
Number of wires : 4
Number of plugs : 2
Number of pins :4
Wire to wire resistance :
Alternator :Yellow to Ground = 0.4 ohms +/-20%
Pickup : White/Red to Black = 20 ohms +/-20%
Source : Brown to Ground = 415 ohms +/-20%
Before installing your new stator
Our stator may use a different wire color code than your original.
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible no less than 0.010??.
find parts for :