Brand new aftermarket stator
Direct replacement to your original unit.
The quality exceeds the OEM equipment.
All products shipped are tested.
.
Battery condition is extremely important. No stator can work correctly with a bad or weak battery. Always fully charge your battery before performing any charging system tests or replacing parts. If there is any doubt, have the battery load tested or replaced.
All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part.
KTM 250 EXC Euro -- 2018-2020
KTM 250 XC -- 2020
KTM 250 XC-W -- 2018-2020
KTM 300 EXC Euro -- 2018-2020
KTM 300 XC -- 2020
KTM 300 XC-W -- 2019-2020
KTM 450 Rally Factory Replica -- 2017
KTM 450 SX-F -- 2009-2010
KTM 450 XC-F -- 2008-2010
KTM 450 XC-W -- 2012-2016
KTM 500 EXC -- 2012-2016
KTM 500 XC-W -- 2012-2016
83039004000
55439104000
55439104100
Dimensions :
Interior diameter : 35 mm
Exterior diameter : 89 mm
Thickness : 18 mm
Length of wires stator to grommet : 94 mm
Length of wires grommet to plug : 406 mm
Other specifications :
Number of wires : 3
Number of plugs : 1
Number of pins : 3
Wire to wire resistance :
Alternator : Black between Black = 0.4 ohms +-20%
Before installing your new stator
Our stator may use a different wire color code than your original.
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible no less than 0.010".
find parts for :