ELA 10 DATA LINE ANALYSER is a flexible and highly functional hand held instrument for analogue testing in the range 20 Hz to 20 (85) kHz. Digital signal processing (DSP) technology delivers fast accurate results in a compact battery powered instrument ideal for field use. It is intended for the test of 2/4 W ordinary or special quality leased circuits and dial-up circuits.
ELA 10 provides single sided and end-to-end measurements with two instruments in MASTERSLAVE arrangement. Just one person, thanks to the communication between the two instruments, can perform such measurements. Operation is made extremely simple by means of pre-defined automatic test sequences.
ELA 10 can be programmed as MASTER and SLAVE as well. Tolerance masks of cable parameters and the principal system parameters are pre-programmed for ITU-T M.1020, M.1025 and M.1040 systems.
When the automatic test sequence is ready ELA 10 provides an immediate PASS/FAIL indication by comparing the test results with the tolerance masks.
Detailed test results are available in graphic and numeric forms. In case of FAIL indication the reason of failure is marked with asterisks.
The test results can be stored in memory and transferred to PC for post processing or creating archive.
FEATURES
· Comprehensive parametric testing in the frequency range 20 Hz to 20 kHz
· Spectrum analyser and out of band noise measurement up to 85 kHz
· Measurements from ITU-T M.1020, M.1025, M.1030, M.1040, M.1050 and M.1060
· Analogue-to-analogue measurements on PCM systems
· Quasi analogue graph shows the measured results graphically
· Simultaneous phase hit, gain hit, impulse noise, and interruption event counting
· Interruption measurement with histogram display of results
· Group delay distortion measurement
· A range of accessories for signal balance, return loss, impedance and other measurements
· Integral loudspeaker and microphone
· Service telephone facility
· Loop holding and dialling (pulse and DTMF) for dial-up circuit testing
· Acoustic pair detection facility
· AC-DC Voltage measurement
· Memory for phone numbers
· In-service talk/listen and voice monitoring
· Automatic Master-Slave test sequences with pre-programmed templates and parameter sets
· Immediate PASS/FAIL indication
· USB interface for test results transfer to PC and SW upgrade
· PC program is provided to produce detailed test protocols in Excel format
· Large store-recall memory for test results
· 320 x 240 dot color graphic LCD display
· Internal rechargeable battery with an operating time of approx. 8 hours
· Processor controlled battery manager with three hour fast charging facility
· Selectable English, German or Russian languages
· On line help facility
· Handheld, lightweight (approx. 0.8 kg)