Item Description
Thank you for your viewing!
In addition to the power plug and inlet plug, it supports various parts such as RCA plug, XLR plug, HDMI terminal, USB terminal, etc. The unstable plug is supported from the bottom, and not only vibration absorption but also static electricity is suppressed by the effect of NCF. You can combine it with the Extension Shaft Bar, which is sold separately, and use it in various ways depending on your ingenuity.
*NCF 〜 nano crystal formula ... Compounded special material NCF as an electrostatic countermeasure. Removes static noise.
Key Specifications
Multi-Material hybrid structure
It effectively absorbs vibration from connectors and cables connected to components and wall outlets, dramatically improving their performance. Compounded special material "NCF" to prevent static electricity. In addition to the strong damping effect, the electrostatic effect has been enhanced. In this way, noise generation is suppressed, a sense of silence is heightened, and the muddiness of the sound is eliminated, thereby bringing out the original attractiveness of the sound source which has been buried. It does not color the sound, but brings out the ability of the original sound source and equipment.
The base unit has a special powder coating (fog black) finish on SPCC (steel-plate-cold-roll-coil) material for a more stable vibration damping structure. The new design allows the cradle to be set much lower than previous models, and supports HDMI, USB, and low position power plugs for a wide range of specifications.
Structure and features of cradle-flat section
1. NCF (multi-material hybrid structure) audio grade ABS resin (bottom) and NCF blended nylon resin (cover) (electrostatic effect)
2. Damping mat
3. Vibration transmission shaft (center column)
4. Vibration suppression wall ... Structure to avoid resonance
5. Semi-enclosed air chamber ... Internal air pressure is resistant to vibration.
*When the cradle flat part is at the lowest position, the height from the ground is 22 mm. Be careful of the height of the equipment.
Specification Description
Basic Height Setting -23.8 mm Extension Setting -81.4 mm
Base Unit External Dimensions 89.8 x 66.0 mm approx.
External Dimensions W 46 x L 106 x H 23.8 mm approx.
Weight (Net) Basic Settings -130.5 g approx. Extension Settings -177.5 g approx.
Accessories - 2 extra shaft bars,
Fixed Ring x 2, Special PU Non-Slip Transparent Mat x 4
*NCF 〜 nano crystal formula ... Compounded special material NCF as an electrostatic countermeasure. Removes static noise.
Key Specifications
Multi-Material hybrid structure
It effectively absorbs vibration from connectors and cables connected to components and wall outlets, dramatically improving their performance. Compounded special material "NCF" to prevent static electricity. In addition to the strong damping effect, the electrostatic effect has been enhanced. In this way, noise generation is suppressed, a sense of silence is heightened, and the muddiness of the sound is eliminated, thereby bringing out the original attractiveness of the sound source which has been buried. It does not color the sound, but brings out the ability of the original sound source and equipment.
The base unit has a special powder coating (fog black) finish on SPCC (steel-plate-cold-roll-coil) material for a more stable vibration damping structure. The new design allows the cradle to be set much lower than previous models, and supports HDMI, USB, and low position power plugs for a wide range of specifications.
Structure and features of cradle-flat section
1. NCF (multi-material hybrid structure) audio grade ABS resin (bottom) and NCF blended nylon resin (cover) (electrostatic effect)
2. Damping mat
3. Vibration transmission shaft (center column)
4. Vibration suppression wall ... Structure to avoid resonance
5. Semi-enclosed air chamber ... Internal air pressure is resistant to vibration.
*When the cradle flat part is at the lowest position, the height from the ground is 22 mm. Be careful of the height of the equipment.
Specification Description
Basic Height Setting -23.8 mm Extension Setting -81.4 mm
Base Unit External Dimensions 89.8 x 66.0 mm approx.
External Dimensions W 46 x L 106 x H 23.8 mm approx.
Weight (Net) Basic Settings -130.5 g approx. Extension Settings -177.5 g approx.
Accessories - 2 extra shaft bars,
Fixed Ring x 2, Special PU Non-Slip Transparent Mat x 4
100% Authentic items from Japan!! Please feel free to contact me if you have any questions :-)
Please Note: Import duties, taxes, and charges are not included in the item price or shipping cost.
AC100V / 50-60hz, plug type A
A transformer may be required depending on the products or countries.The language may be Japanese only. Please make sure if this item will work in your country. The download code for used products cannot be used. Please be careful of the region code for game consoles and game software.