EXP:12 month or better!
Description of Self-Cure Resin:
1.
This product is one kind of orthodontic direct bonding system resin
with aromatic bis dimethyl acrylate resin as its main material.
2. As a new-type orthodontic direct
bonding system, it is convenient to use with little waste, easy to
handle independently and has a favorable clinical bonding strength.
3. It consists of primer and paste
with acid etchant, spatulas and small brusher as its accessories.
Preparation: Clean tooth enamel surface,eliminate tooth contamination,rinse then isolate tooth and blow-dry.
Etching:Etching the enamel of the
tooth with acid etchant for 50 or 60 sec. Rinse and dry with clean air.
If the enamel does not have a chalky appearance, pls. repeat the
process;
Brushing: apply a thin layer of the primer over the etched enamel with the brusher;
Bonding: apply another thin layer
of the paste to seal the edges, adjust the bracket within 20 sec, give
pressure for 5 to 10 secand remove the excessive primer and paste after
40 to 60 sec; then do orthodontic procedures followed 5-min curing.
Packaging Detail:
3 x black syringes (3.5g)
1 x primer bottle (10ml)
20 x Brushes
Description of Light-Cure Resin:
Warning:
Ortho-Bonding primer and adhesive contains acrylate monomers. Acrylate
monomers are known to produce allergic skin reactions in certain
sensitive individuals. May cause eye and skin irritation.
Precautions: A void eye and skin contact. Wear gloves when handing this material.
Precaution: Please follow
manufacturer's directions on the handing, proper use and recommendations
for eye protection, when using a curing light
This system is designed to be used
at room temperature (20-25°C, 68-77°F)。Storage between 2-27°C/35-80°F
Light Sensitive
Contents:
3 x Adhesive paste Syringes (10.5g)
1 x Primer Bottle (8ml)
40 x Brushes
1 x Instruction Booklet
Description of Blue Glue:
This orthodontic
adhesive provides a longer working time and a rapid setting time. Can be
placed directly into bands. Excess flash is easy to clean up prior to
the light curing and the cement is easy to see due to the blue color.
It contains fluoride to reduce the chance of declacification.
Packing list:
1 x Etchant acid Gel 2.5ml syringe;
1 x Light Cure Adhesive Paste 5g syringe;
1 x Syringe tip
Box size: 17*11*2.5cm
STORAGE: Store at 25℃ or less in a cool and dry place and avoid direct sun exposure. Recap the syringe after use.
Description of Green Glue:
Reasons for choosing green glue:
1. Green Glue is the two-way color
change adhesive for brackets that provides the strength flexibility and
intelligent features you demand.
2. Quick-cure polymerization ensure
more reliable bond strength 185% more working time than other light
cure adhesives allow for better placement.
3. The formula of green glue can
improve the impact resistance by 118%, effectively reducing the
accidental fall of brackets.
4. Two color change: Heating (Green)----Clear ---Get Cool( Green ), Green---Clear---Green
It is green when the temperature is
low, allowing you to clearly identify the excess or residual green glue
during the bonding and removal of brackets, so that it can be quickly
and accurately removed without damaging the enamel layer. However, after
light curing, the color of the green glue will change from green to
transparent at normal temperature in the mouth, maintaining a beautiful
effect.
Packing List:
1 x Adhesive paste Syringe (4g)
1 x Primer Bottle (3ml)
1 x 37%Gel Etchant (2.5ml)
Other accessories