Brand | SUNDELY |
---|
MPN | Does Not Apply |
---|
Colour | Black |
---|
Material | High Quality Plastic and Metal |
---|
Manufacturer Part Number | Does Not Apply |
---|
新增網頁2
Ford
Focus/Mondeo/SMAX/Focus Flip Key Remote with 4D-63 40 Bit Chip 433mhz
Brand New, Never Used, Not
Refurbished!!
we will answer any of your
questions regarding item(s)& service within 24 hrs.
We just accept paypal,please be aware before
bidding!!
Description:
Condition: 100% brand new
Material: High
Quality Plastic and Metal
Color: Black
Quantity: 1
pc
Case size: 69
x 36 x 15 mm / 2.71" x 1.41" x 0.59" (LxWxH)
Blade size:
45 x 5.5 mm / 1.77" x 0.22" (LxW)
Folding Flip
Remote Key FOB TRANSMITTERS 3 Button for Ford 433MHZ Uncut HU101 Blade
Transponder
chip 4D-63
Remote
Frequency: 433mhz
It fits with
cars of Ford such as
for Focus
2005-2010
for Mondeo
2007-2010
for Fiesta
2009-2010
for Galaxy
2006-2010
for C Max
2003 2010
for S Max
2006-2010
Package
included:
1x Remote
Key
Note:
To program
the remotes you will need to have all the remotes available for the car as you
need to relearn them all.
To program
the key you will need to have 2 keys available for the car.
we will
start with remotes
Sit in the
car with the doors closed
Turn the
ignition to the ACC postition and press the rear demist button 3 times, within 5
seconds.
You then
press a button on the first remote to be trained , the door locks will cycle.
Then press a
button on the 2nd to be trained and the door locks will cycle again.
Repeat this
step for the the rest of the remotes to be trained to the car.
The first
keypad trained will result in one door lock cycle, the second will result in 2
door lock cycles, and so on.
There is a
limit of 8 remotes per car.
Turn the
ignition to the OFF position to exit the learning mode.
Your remotes
are now programmed to your car.
Now for the
keys
You will
need to have 2 orginial keys available if you wish to train a new key follow the
elow instuctions.
If you only
have 1 working key it will need to be programmed by dealer or locksmith (the
procedure listed below will not work)
ensure you
have all keys present during recoding as any key not present will be removed
from the memory.
Sit is the
drivers seat with doors closed
Put the
first coded key into the ignition & turn to the ACC position.
Turn this
key to the OFF postition & remove the key.
Within 5
seconds put the 2nd coded key into the ignition & turn this key to the ON
postition.
Turn this
key back to the OFF postition and remove the key.
The door
locks will then cylcle to indicate that the learning mode is active.
Within 5
seconds put the new 3rd or new key into the ignition & turn to the ON
postition.
The door
locks will cycle 3 times to indicate the 3rd key has been trained , ensure you
wait for the locks to finish cycling before turning the key to the OFF
position.
Repeat this
step for any following keys , The 4th key trained will cycle the locks 4 times,
and so on. you
can train up to a maximum of 8 keys.
your new key
should now be coded to your car