It is widely used in plastics raw materials products, the petrochemical industry and related universities, scientific research institutes, and commodity inspection departments.
Features:
1.The machine adopted the artificial intelligent instrument control. With a short constant temperature period and a minimum over-measurement.
The temperature controller partly adopted the SCR, which make it more steady and accurate.
2. It is used to determine melt-mass flow rate (MFR).melt-Volume flow rate (MVR) and melt density of thermoplastic resin.
3.It is applicable not only to the higher melting temperature, such as polycarbonate, nylon, Fluor plastics, poly oxide and other engineering plastics
4. It also applies to plastic measurement of melt lower temperature, such as polyethylene, polystyrene, polypropylene, ABS resin, polyformaldehyde resin.
5.The machine can test the melting temperature of the material in the testing temperature; the system can also have the temperature adjusting function in the same time.
STANDARDS ISO 1133 ASTM D1238 GB/T 3682
Model |
400AA |
Measure range |
0.1-400.00g/10min(MFR) |
Precision of temperature control |
Room temperature-450 degree C |
Temperature control precision |
0.5 degree C |
Taximeter timing accuracy |
1S or 0.01s Timing range: 1-9999S or 0.1-99.99S
|
Displacement precision |
0.01mm |
Load |
Full load |
Cutting mode |
manual, time control |
Inner diameter of cylinder |
9.550mm
±
0.025mm
|
Cylinder length |
160mm |
Cavity die |
Tungsten carbide, L
8.000mm
±
0.025mm
internal diameter::
2.095mm
±
0.005mm
|
Power |
0.45KW |
Power supply |
AC220V ,50Hz |
Dimension |
400mm×500mm×600mm |
Net Weight |
60Kg
|