This batch of motors is not a common eccentric shaft, but a central shaft. The gearbox is made of all-metal material.
The middle 8-stage reduction gear, the motor input shaft primary copper gear, and the reduction motor output stainless steel shaft, you can see this The design of the motor is obviously aimed at the miniature and high-torque design. The internal gearbox has a total of 8 speed reductions, and the reduction ratio is very huge. The shopkeeper tried the machine at will. Even if the power supply is only 2V, the motor cannot be blocked by hand, and even if it decelerates, the gearbox is still very quiet. When it is raised to about 8V, unless the ear is close, you can only hear a slight rustle. Voice.
The structure of the gearbox is also quite interesting. The gearbox is divided into two bins. One bin is the input part.
The input part has 6 levels of deceleration, and there is also a 2-level deceleration in the other box. The integrated design of the gear box is equivalent to further strengthening the strength of the reduction box. Compared with the independent partition, this design is self-evident, and the design strength is very high.
The nominal rated voltage of this motor is DC12V, and the applicable voltage is 2-18V. The lower the voltage, the torque will be smaller when the speed is increased. The torque will be greater when the voltage is increased, and the sound will be relatively louder. After the test, the owner feels that this motor is used at 12V It will be good within the 12V deceleration output is about 6 rpm, whether it is speed torque or sound control is very good.
The motor weighs about 97 grams.