Description:
This laser driver is designed for a wide range of high-power laser diodes. This driver is fully user adjustable via an included digital screen. The driver can supply an output of 10V – 120V at 0 – 15A with a maximum power limit of 500W.
The driver can be powered by many flexible sources such as a 12V DC wall adapter, 3S-4S lithium battery pack, PC computer PSU, test bench power unit, 12V lead acid car battery, 36V e-scooter charger, and numerous other options. The source of the power must be lower than laser voltage.
Input voltage (U-IN): DC 8V~60V
Input current: 0~15A
Output voltage (U-OUT): 10V~120V
Output current: 0~15A
Conversion efficiency: 85%
Working frequency: 150kHz
Short circuit protection: 20A fuse
Working temperature: -40C/85C
Control method: Digital control with LCD screen display
Output ripple: ≤50mV
Net weight: 213g
PCB size: 48mmx100mmx110mm/1.89x3.94x4.33"
Description: This laser driver is designed for a wide range of high-power laser diodes. This driver is fully user adjustable via an included digital screen. The driver can supply an output of 10V – 120V at 0 – 15A with a maximum power limit of 500W. |
Driver Details: Input voltage: DC 8V~60V Input current: 0~15A Output voltage: DC 10V~120V (greater or equal to input voltage) Output current: 0~15A To adjust output settings: Press SET (2x) Quickly to enter edit mode. Voltage output customization will be displayed first. Voltage value will blink. Use the UP (+) or DOWN (-) arrows to change the Voltage output value. Press SET once to begin edit of output Amp value. Use the UP (+) or DOWN (-) arrows to change the Amp output value. Press SET (2x) Quickly to exit editing. (Values will remember after shutdown) To turn on/off output: Press OK to cycle output.
|