1. 100% brand new and high quality
2. Small volume, light weight and waterproof
3. Applicable to all brands of cars
4. Delayed shutdown function
5. Normally on + dimming + delay + automatic switching
6. Simple installation without replacing any wires
7. Intelligent start: when the vehicle is started (the voltage must be higher than 13V +), the daytime running lights will turn on automatically. When the headlamp (or reading lamp) is turned on, the daytime running lamp will be dimmed (dimmed). When the vehicle is turned off (the voltage must be lower than 12.5V), the daytime running lamp will be off after 15 seconds!
Specifications:
Color: Black
Material: ABS
Dimensions: 3.9 x 2.1 x 1.7cm (L x W x H)
Weight: 32g
Voltage: 12-18v
Operating current: 3A
Delayed shutdown: 15s
Packing list:
1 x daytime running light controller
Notes:
After the battery is connected, the daytime running lights will be on for about 15 seconds, and then turn off. This is normal (delay function is implemented). After that, you need to start the car. When the voltage reaches 13V +, it will start working!
Product range:
1. The starting voltage is 13V +, and the flameout voltage is lower than 12.5V (if it is higher than this value, it will be extended for several minutes until the voltage drops.)
2.1 the total power of daytime running lamps shall not exceed 18W (most daytime running lamps will not exceed the total power)
Wiring instructions:
1. Connect the positive and negative poles of the daytime running lights on the left and right first, and the negative pole first.
2. Connect the red and black wires at the fused input end of the controller to the positive and negative poles of the battery, and the red and black wires at the output end to the positive and negative poles of the daytime running lamp.
3. Connect the yellow wire on the controller to the positive pole of the headlamp (or reading lamp). When the headlamp (or reading lamp) is turned on, the brightness of the daytime running lamp will be halved (dimmed) to realize the dimming function (yellow line). You can choose not to connect, that is, abandon this function without affecting other uses).
Package content:
1pcs daytime running light controller