OO9/009 Steam Tram Railcar Locomotive body kit for KATO 11-109 chassis loco Toby
A narrow gauge version of the LNER J70/Y6 GER C53/G15 Tram Loco as used for ‘Toby’ in Thomas the Tank Engine.

£19.99 each + 2nd Class postage per order (Note, this is too wide for Large Letter rate, so Small Parcel + 2nd Class)

3D printed resin body kit for mounting on KATO 11-109 Chassis or my B11-109S Compatible Chassis for KATO 11-109. Please check all the photos, and read the text below to know what you are receiving. There are no instructions with the kit, so refer to notes below !

Version 6 of the kit was updated some time back, to have better handrails, improved/individual windows, separate roof etc (not show in current photos, those are V4). *** It is also available with an NEM slot instead of the fixed coupling, but requires the Kato chassis to be cut back, and is not usable with my B109 chassis adapter ***

Dimensions: Max height from rail top: 39mm (chimney), max width: 25mm (handrails), length to end of couplings: 65mm

1 - Main Body - including couplings + chimney inside to add to roof
1 - Roof
8 - 3D Printed Windows
1 - Set of nameplates - "Toby", "Goblet", "Tankard", and "Chalice"
3 - Drivers/crew in various poses
1 - Clear acrylic sheet – a small piece as alternative windows

Chassis not included, check stock of KATO 11-109 Chassis (contact me if 0 listed) or my B11-109S Compatible Chassis for KATO 11-109 or my Dummy-109 Chassis.

ASSEMBLY: the chimney (+ spare) is printed inside the body, apply light sideway pressure to break off, then attached to roof

Photos show all the parts supplied (this is V4 not the current V6 – photos will be updated soon!), along with some painted versions - some are earlier prototypes, so have less features/options, e.g. roof detail, planking, rivets.

Chassis and couplings: The chassis clips easily in place without any modification. The N-gauge couplings need to be removed. The body casting includes the standard OO9 coupling hook. You can of course carefully remove the hook, and drill out for another connector of your choice.

Windows, due to being 3D printed, they are not fully transparent. The back of the windows is a little grainy, giving some diffusion, although a little gloss varnish will improve it. The windows may require some fine sanding or adjustment to fit well. The 3D print tends to bow backward, which is ideal, as just a single spot of super glue in the middle fixes them in place. We are now including a small piece of acrylic sheet that can be cut to size and gives a better appearance.

Figures and fittings: The 'kit' also includes 2 standing workers/crew. Figures can be painted then inserted within the tram (a bit fiddly !).

Some photos show with the KATO 11-109 Chassis fitted, and also with the Dummy-109 Chassis. This allows for either static display option or for dummy double-heading, or top and tail operation. Both chassis are available for no additional postage, as are multiple kits/models. The postage charge of £2.99 should be for the entire order (contact us if any problems).

The parts are printed in high-resolution resin, we are currently printing in white, although you may receive another colour, All prints have been cleaned and cured thoroughly, but as with all 3D prints, there may be small blemishes to tidy up.

All 3D models can be a little delicate, so don't drop them on the floor ! Also, we recommend any work be done with a file/sandpaper rather than trying to cut, as this is gentler.

We cannot be held responsible for breakage during handling, but if they are damaged in the post, then please provide photographic evidence of packaging etc.

We can often dispatch same day, but allow 2 days. At times there may be a delay if we have to make parts to order.

Variant B/C Grade: We have a few kits where the tram roof had a hole in, or other slight defects (B Grade - £18) that should be easily repairable, we also have some with bigger defects (C Grade - £15), see last 2 photo for examples. The rest of the print is as usual, and all the other parts are included. The get one of these, make an offer of £18 (B) or £15 (C), and say you want a ‘B Grade’ or a ‘C Grade’ kit.

Lastly, we are always interested in feedback, both on this model, and suggestions for what to work on next.

Full list of items available via eBay ...
Please check Brooks3Dmodels.com for up to date model lists, as eBay make it impossible to update all the listings here.
Locos:
OO9 Glyn Steam Tram Loco
OO9 Bagnall Contractors Quarry Loco
OO9 Baguley Drewry RNAD Diesel
OO9 Steam Tram 'Toby'
B11-109SC Adapter Including Compatible Chassis for KATO 11-109
B11-109SA Adapter Excluding Compatible Chassis for KATO 11-109
Dummy-109 Chassis
KATO 11-109 Chassis
TU-KOPPEL 0-4-0 Chassis
Rolling stock:
3 off Glyn Valley Tramway GVT Slate Wagons
3 off Snailbeach District Railways Large Hopper Wagons
3 off Corris Slate Slab Trestle Wagons
3 off Ffestiniog 2 Ton Flat Slab Wagons
WLLR Closed Goods Van
3 off RAF Fauld Ammo Wagons
Glyn Valley Tramway GVT Guard’s Van
3 off Ffestiniog 3 Ton Slate Wagons
3 off GVT 4 Ton Granite/Mineral Wagons
6 off Talyllyn 2 Bar Slate Wagons / 3 off Talyllyn 2 Bar Slate Wagons
6 off Penrhyn Wagons
6 off Tipper Wagons / 3 off Tipper Wagons
Pair (2) Cattle Wagons/Vans
6 off Ffestiniog 2 Ton Slate Wagons / 3 off Ffestiniog 2T Slate Wagons
7mm Narrow Gauge / O-16.5
3 off 7mm Tipper Wagons
3 off 7mm Ffestiniog 2 Ton Braked Slate Wagons

Thank you
Nigel