DT-3767
Data bus: | 16-bit, ISA |
Size: | Half-length, full-height card |
Hard drive supported: | Two IDE(AT) Interface drives |
Floppy drives supported: | Two 360KB, 720KB, 1.2MB, or 1.44MB drives |
CONNECTIONS | |
Function | Location |
40-pin IDE(AT) Interface connector | J1 |
34-pin control cable connector-floppy drive | J2 |
2-pin connector-Drive active LED | JP2 |
USER CONFIGURABLE SETTINGS | |||
Function | Location | Setting | |
» | Direct IRQ14 control | JP1 | Pins 1 & 2 closed |
Select SLAVE/ACTIVE control | JP1 | Pins 2 & 3 closed | |
» | Floppy drive enabled | JP3 | open |
Floppy drive disabled | JP3 | closed | |
» | Hard drive (CS0) port address is 1F0-1F7h | JP4 | Pins 2 & 3 closed |
Hard drive (CS0) port address is 170-177h | JP4 | Pins 1 & 2 closed | |
Hard drive disabled | JP4 & JP5 | open | |
» | Hard drive (CS1) port address is 3F0-3F7h | JP5 | Pins 2 & 3 closed |
Hard drive (CS1) port address is 370-377h | JP5 | Pins 1 & 2 closed |