VFD Inverter 1.5KW 2.2KW 3KW 4KW 5.5KW 3phase 220VAC Variable Frequency Driver CNC Engraving Milling Router Machine
Specifications :
|
Power |
1.5KW |
2.2KW |
3KW |
3.7KW |
5.5KW |
|
Applicable Motor(kW) |
1.5KW |
2.2KW |
3KW |
3.7KW |
5.5KW |
|
Input Rating Current(A) |
11A |
16A |
22A |
27A |
36A |
| Input
Voltage |
Single Phase AC 220V |
|
Input Frequency(Hz) |
50/60Hz |
|
Output
Current(A) |
7A |
11A |
15A |
18A |
25A |
|
Output Voltage |
Three phase 0~220V |
|
Output Frequency |
0~1000Hz |
Product feature
Frequency control:
1.Range: 0.0~1000.00Hz
2.Other functions: Lower limit frequency, start
frequency, frequency of parking, three jumping frequency can be set
respectively
3.Precision:
Digital: 0.01% (10 ~ 40 centigrade degree ); Analog: 0.1%
(25±10 centigrade degree)
4.Keyboard
set way: 0.01 Hz can be directly to setting by up and down.
5.
Analog set way: external voltage 0 to 5V, 0 to 10 V, 4-20 mA, 0 to 20 mA
General control:
1.Multifunctional
output: relay output, open-collector output, implementation of operating the indication
and alarm of zero velocity, counter, external anomalies, program operation etc.
2.Other
functions: automatic voltage regulator (AVR), slow or freedom stop, dc brake, automatic
reset then start again, frequency tracking, PLC program control, moving around
control, carrier is adjustable, up to 16 KHZ, etc.
3. ACC/DEC control: 4 ACC/DEC
time (0.1-6500 seconds) arbitrary choice.
4.V/F
curve: can be arbitrarily set V/F curve
5.Torque
control: can set torque increasing, the largest launch torque can be up to 150%
in 1.0 Hz
6.Multi-function
input: 6 multi-function input, 8 period of speed control, the program runs, 4
period of ACC/DEC switch, up and down function, counters, external abrupt
stop, and other functions.
Defensive
function:
1.Instantaneous power
outage restart: after instantaneous stop can restart by frequency tracking way.
2. Stall prevent:
stall prevention of ACC/DEC operation.
3. Output short circuit:
circuit protection
4. Protection
functions: return flow, over-voltage, under-voltage, overload, overheating, voltage
prevents stall, current prevents stall etc.
5. Other features:
reverse restrictions, directly start and fault reset function after booting, lock
parameters, etc.
6. Overload
protection:
G type
machine: 110% rated current per 10 minutes; 150% rated current per minute and
180% rated current per second.
P type
machine: 100% rated current for 10 minutes; 150% rated current per second
7. Over voltage: 220V
line: dc voltage > 400V; 380V line: DC voltage > 800V
8. Insufficient voltage: 220V line: dc voltage<200V; 380V
line: DC voltage < 400V
Application
industry:
Engraving machines,
extruding machine, Crane Blow moulding machine, Metal packaging machinery, air
compressor, hydraulic punching machine,
bottle blowing machine, printing machine, paper machine, textile machinery, plastic
machinima, chemical machinery, woodworker,
Industrial Washing Machine,
Middle and
low speed elevator, rolling mill, draught
fan, constant pressure water supply, building material equipment, numerical control machine, food machinery, drawbench,
drilling machine.
Connecting
mode
1. L N
connect 220V holdhouse voltage(part of zero line and live line),three phase is
R S T
2. U V W
connect spindle motor. The 1,2,3 pin of spindle motor plug connect converter
U,V,W. That is: 1- U,2-v,3-w,4 is ground wire. If spindle motor rotated
reverse, Please send any two thread swap places
3.Control com is comcon
terminal ,X2 low speed ,X3 middle speed ,X4 high speed(this is D
macro card,DSP manual control mode)
Adjust
converter parameters
1.Press
cancel button:P000 turn into P087, confirm -0- turn into 101,display H0.0(this
is external terminal control)
2.Turn
into manual control: press cancel button P000 turn into p065,confirm that is
0,display P064,then press cancel button ,display H0.0, Rotate knob to H400.0(when
the spindle is 400hz) or other, converter display a number multiply by 60,the
results is the rotating speed. Press the operation or stop then ok.
