Oxyhydrogen flame generator (water electrolyzed oxygen & hydrogen flame generator) is a hydrogen energy hi-tech product. Based on the principle of electrolyzing water to generate hydrogen, it combines several inventions and innovative technology. In jewelry industry, it is called "water welder machine” or “hydrogen & oxygen melting / welding machine”, while in organic glass industry, it is called “Fire-polishing machine”. Double cell body,3+3 layers. Special stainless still.
Total Volume: 4000ml.
Flame Strength: Continuously for 1 big nozzle = 0.8 mm fire nozzle, or 2 C = 0.5 mm, 1 B = 0.4 mm + 1 D = 0.6 mm, 3 B = 0.4 mm, 4 A = 0.3 mm.
Advantages:
• No-carbon oxyhydrogen flame
• Small flame with high temperature
• Safe and easy to use
• Reliable, no-pollution
• Low cost.etc
Application:
• Fuse the lead or tin alloy plate for storage battery.
• Cut and fuse quartz or fine parts etc.
• Peel off FPC of computer, fuse led chip and thermocouple.
• Weld jewelry made of gold, silver, copper, lead, tin casting etc, such as stud, safety pin, chain etc.
• Polish irregular acrylic surface. After polish, the work piece will be smooth and shiny.
• Below 8MM glass tube sealing.
| Model | SU-020 |
| Power Input | AC-220±20V or AC-110±10V 50-60HZ Total Power: <600W |
| Volume & G.W | Sup-hard-green paper Package: 21.3" x 12.2" x 18.1" (540 x 310 x 460mm) G.W: 22KG |
| Oxyhydrogen Gas Made | About 150-160L/hour |
| Electrolytic Cell | Double cell body, 3 +3 layers.Special stainless still. Total Volume 4000ml. |
| Digital Ammeter | If indicating 100-120A, machine is working well to make oxhydrogen gas. |
| Pressure Auto-control | Pressure high than 0.15mpa switch off; low than 0.09mpa switch on. |
| Gas Barometer | Low than 0.15mpa is right and safe; Oil inside for shockproof. |
| Torch & Nozzles | 2 torch with red copper nozzle A, B, C, D & pinhole. |
| Electrolyte (alkali) | Must to add electrolyte at the first time of use. 500g electrolyte-powder mixed 2500ml water in a ovenproof plastic container. Change electrolyte when dirty or losing efficacy. |
| Consumed Fuel | Water. Only water, do not add electrolyte again. When the water level is lower than M line, please stop machine for adding water to near high line. From best to ordinary are: distilled water, purified water, cold boiled water, controlled water. Clean water is ok, but do not use mineral water. Water consumption: about 100ml/hour, need to add water about every 4-5 hours. |
| Work Environment | 0-50°C, biggish room or well ventilated. |
Packing List
 |
Machine | 1 set |
 |
Flame Gun | 2 pcs |
 |
Three-way Connector | 1 pc |
 |
Plastic Funnel | 1 pc |
 |
Flashback Arrestor | 1 pc |
| |
|
|
| Instruction | 1 pc |
P. S.: Electrolyte power (NaOH or KOH) is forbidden by express company, so we could not put it into the package. You can buy it from local chemicals paint.
You should buy some powder, one bottle is 500g, and it can be used about 3 - 4 months.
