Riello 40 G20 kerosene burner. This burner produces heat in the range of 90 to 213kW. This is a very high output indeed, so please be sure that your system can handle the heat!
Check that your heat exchanger can withstand the high temperatures generated by this burner. A good place to start is by checking to see what the output of your existing burner is (in kW).
Dimensions - 350mm wide, 290mm high, 295mm deep. Blast tube - 125mm long, 118mm wide. Fuel consumption - 8-18 kg per hour. Electrical supply - Single phase, 230V 10% ~ 50Hz
All burners come with an instruction manual, flange, gasket, wiring loom and braided flexible hose.
Model | 40G3 | 40G5 | 40G10 | 40G20 | 40G20S | |
Accommodation mode | ||||||
Output power | KW | 23.8/35.9 | 28-60 | 54-120 | 95-213 | 95-240 |
Mcal/h | 20-31 | 24-52 | 46-103 | 82-183 | 82-206 | |
Kg/h | 2-3 | 2.3-5 | 4.5-10 | 8-18. | 8-20. | |
Operating temperature | C Min./Max | 0/40 | ||||
Calorific value | Kwh/kg | 11.8 | ||||
Kcal/kg | 10200 | |||||
20C viscosity | mm2/s | 4/6 | ||||
Model | RBL | |||||
Pump | Flow (kg/h) | 30 | ||||
Atomization pressure | Bar | 8/15 | ||||
Light oil temperature | Max C | 50 | ||||
Fuel preheating | No | No | No | No | No | |
Draught fan | Model | Consequent fixed blade | ||||
Air temperature | Max C | 40 | ||||
Power supply | Ph/Hz/V | 1/50/23010% | ||||
Control box | Mode | RBL530SE | RBL530SE | RBL530SE | RBL530SE | RBL530SE |
Power | KW | 0.12 | 0.13 | .017 | 0.33 | 0.33 |
Rated current | A | 0.7 | 0.75 | 0.85 | 1.5 | 1.5 |
Protection level | IP | 40 | ||||
Motor power | KW | 0.9 | 0.1 | 0.14 | 0.3 | 03 |
Motor rated current | A | 0.7 | 0.75 | 085 | 0.15 | 0.15 |
Motor starting current | A | 2.5 | 3 | 3.5 | 6 | 6 |
Motor protection level | IP | 20 | ||||
Ignition transformer | Model | Into the control box | ||||
Operation mode | Intermittent Need to stop once every 24 hours |