This Syncable RGB unique design allows for the enclosure to be under the control of the System RGB controller to display RGB LED in sync with the system RGB LED. Besides the color, this enclosure offers the latest bridge from USB to your M.2 NVMe at ultra-fast speed. The enclosure equips with a USB 3.1 Gen2x1 bridge to the M.2 NVMe for fast data transfer via a native USB C interface. This Vantec’s signature design comes in Pocket Size, Anodized Aluminum, RGB LED switch, toolless NVMe mount, UASP, No Drivers Needed, and more. The heat plate, thermal pad, and solid Anodized Aluminum just whisked off the heat from your NVMe to keep it cool. These are all the great features you can expect from Vantec Storage.        


    Note: * For RGB Syncable Function, RGB motherboard must be compatible and uses the latest RGB software. For NON-RGB motherboard, it will not be Syncable, but the enclosure will display rolling RGB color. See FAQ for more information.


    •  

      • Syncable RGB* Multi-Color Glowing RGB LED with System
          In Sync with System RGB*, Glowing Vibrant Color Design
      • Design For Ultra-Fast NVMe module
          Latest NVMe Storage solution with USB 3.1 Gen2x1 for Speed  
      • Anodized Aluminum to Keep Cool
          Strong, durable, and heat dissipation properties
      • USB 3.1 Gen2x1 with a USB C interface
          Native Next-Gen USB, designed to very fast
      • ON/OFF switch for RGB LED
          Switch to turn ON/OFF RGB LED light
      • Small Pocket size
          106.8x44.8x16.8mm and Fit Big Capacity NVMe
      • C  to C USB cable
          Tested shielded premium cable with reversible connector;
      • Clear Data activity LED indication
          Activity LED flashing during data transfer
      • Design for Multi-OS compatibility
          Windows 10, Chrome OS, OS X 10.10 or Better, Latest Linux Kernel
      • Support multi-size M.2; Shielded USB C to C cable
          Module Length 2242, 2260, 2280, USB-C cable length 300mm 
      • UASP; Plug & Play; No Drivers Needed
          Work with USB Attached SCSI, Plug and ready to use

        •         * depend on motherboard RGB compatibility

        Model:     NST-210C3-RGB
         
        M.2 size:     Length support 2242, 2260, 2280
        M.2 Support:      M.2 NVMe with “M” Key Only
        Internal Interface:     1 x M.2  (NVMe, M-Key)   
        External Interface:     Standard USB 3.1 Gen 2x1 USB-C
        Enclosure Material:    Anodized Aluminum with Heat Sink
        RGB:    Setting per RGB* controller 
        Power Supply:    Bus-powered, no external power supply needed 
        USB cable Type:    USB C to C  Cable
        USB cable length:      300mm / 11.8 inches
        Dimensions:     106.8 x 44.8 x 16.8 mm / 4.2 x 1.8 x 0.7 inches      
        Weight:    91.76 grams / 3.23 oz.
        OS Support:     Mac OS X 10.10 or higher, Windows 10, Latest Chrome OS, Latest Linux kernel 
         
         
      Environmental
      Operating Temperature:     0 ℃ to +45℃
      Operating Humidity:     10% to 85 % RH (no condensation)
      Storage Temperature:     -10℃ to +70℃
      Storage Humidity:     5% to 90% RH (no condensation)
       
      System Requirements:
    • USB Type-C port
    • Latest OS support for USB-C
    • System with RGB controller support for Sync drive preferred
    • M.2 NVMe module with “M” Key only     
      •  
       
      What's Included: M.2 NVMe SSD To USB 3.1 Gen 2x1 Type C Syncable RGB Enclosure, USB C to C Cable, Heat Transfer Plate, Thermal Pad, Screw Driver, Screws set (partial mounted on the casing), Toolless Rubber Mount (for holding M.2 NVMe), Quick Install Guide