eBay

ETCR9220 H/L Voltage Clamp Current Meter 0.00mA～60.0A CT Size φ68mm

Description:

ETCR9220 H/L Voltage Clamp Current Meter 0.00mA～60.0A CT Size φ68mm

Notice:
The standard package don't include batteries.Because,the international air shipping forbid to ship liquid,powder and batteries,we can not put them in the package box.Hope you can understand buy them in your local store or supermarket.
At the same time, please forgive us that we are unable to provide the English user manual. If you need it, please contact the customer service after purchase.
Thanks for your support!

Product Main Function

1. Measurement of H/L voltage AC leakage current (operate with insulation rod above 600V)

2. Range : 0.00mA～60.0A

3. Resolution : 0.01mA

4. Data Storage : 99 groups

5. Line Voltage : Test of the wire with insulation skin below 60kV, test of bare wire below 35kV (operate with insulation rod)

6. CT Size :φ68mm

ETCR 9220 H/L Voltage Clamp Current Meter adopts CT technology and mask digital integration technology, the instrument composed of special clamp current meter and high voltage insulation rod, If not use insulation rod, which can be used as high accuracy low voltage clamp current meter.

ETCR 9220 H/L Voltage Clamp Current Meter connect with insulation rod, which can use for hight voltage line current measurement of the wire with insulation skin below 60KV or bare wire below 35KV, online current measurements, also with peak hold, data hold and data storage and so on function, the special clamp current meter convenient to clamp or withdraw the tested wire operate by push or pull back the insulation rod.It is widely used in substations, power plants, industrial and mining enterprises, inspection stations, electrical maintenance departments for current detection and electrical field operations. It can replace the H/L voltage transformation ratio tester, which can measure the H/L voltage current of the primary circuit and the secondary circuit respectively, and then calculate the H/L voltage transformation ratio. The insulation rod is handiness, and has the characteristics of moisture-proof, high temperature resistance, impact resistance, bending resistance, high insulation, scalable and so on.

Technical Parameter

Function	Description
Function	Measurement of H/L voltage AC leakage current
Power Supply	DC 6V (LR03×4 alkaline dry batteries)
Measurement Method	Clamp CT, integration method, the instrument can be hung on the line to test, more convenient to operation
CT Size	φ68mm
Range	0.00mA～60.0A(50/60Hz automatic)
Resolution	0.01mA
Shift	0.00A～60.0A automatic shift
Accurac(23℃±5℃RH<80%)	0.00mA～999mA：±1%±5dgt
Accurac(23℃±5℃RH<80%)	1.00A～60.0A：±1.5%±5dgt
Sampling Rate	2 time/second
Display Mode	4-digit LCD display
LCD Size	Detector: 35mm×21.5mm
Meter Size	Detector: 135mm×218mm×60mm
Data Storage	99 groups , stored process display MEM symbol, “FULL” symbol display indicate that storage full
PEAK Hold	Automatically hold the highest test value，In usual test mode, press PEAK key The "PE" symbol is displayed in the upper right corner of the LCD to keep data, Press the PEAK key again to cancel this function.
Line Voltage	Below 60kV current test with insulated skin wire; below 35kV bare wire test (operate with insulation rods)
Data Hold	In general test mode, press HOLD key to hold data, “DH” symbol display. press HOLD Key once again to cancel this function
Data Access	“MR” symbol indication, can access all storage data
Overflow Display	Exceed measure range overflow function: “OL A” symbol display
Automatic Shutdown	15 minutes after boot up, the meter shuts down automatically without any operation, to reduce battery consumption
Batter Voltage	When battery voltage is lower than 4.8V, display low battery voltage symbol “ ”, and remind to replace the battery
Weight	3930g including insulation rod and battery
Working Environment	-10℃～40℃; Below 80%rh
Store Environment	-10℃～60℃; Below 70%rh
Interference	Should avoid extremely strong electromagnetic fields, avoid 315MHz, 433MHz same-frequency signal interference
Insulation Rod Dimension	φ32mm，1m×5PCS
Insulation Rod Withstand Voltage	Detcetor/Receiver: AC 2kV/rms ( between the out shell screws)
Insulation Rod Withstand Voltage	AC110kV/rms（all 5pcs insulation rod connect, between the two ends）
Structure	Anti-Dripping Type II

Package	Outer Package	Carton
Package	Inner Package	Cloth bag
Accessory	Detector	1 PCS
	Insulation Rod（1M）	5 PCS
	Tool Bag	1 PCS
	Manual	1 PCS
	Certificate	1 PCS
	Warranty Card	1 PCS

Payment:

●Accepts payment with PayPal. Via paypal you can use all major credit cards. Items do not ship until payment is recieved in full.

Shipping:

Items are only shipped after PAYMENT is received
Please check out your ADDRESS carefully when processing order
If you haven't received the parcel in 25 days,please allow us 2-3 days for checking undelivered packages before we issue you refund
We can't ship to African countries becasuse of shipping company policy.
To Austrilia,USA and UK7-15 days by e-package, others 15-45 days by Singapore Post or Hongkong Post
If you want to send DHL / UPS / TNT/ Fedex please contact me alone to change the price

Custom Tax

Attention! eBay Custom Tax Policy

●The policy of customs clearance may differ from each country.

●We are not responsible for any applicable customs charge, taxes and duties.

●Import duties and taxes are buyer's responsibility.

●If you have any inquiry for custom clearance, please leave a message.

●We will mark the price you want to declare after communication.

Feedback:

●We rely on our reputation and customer satisfaction to succeed,Therefore,your feedback is extremely important to us ,please leave good feedback to us if you get satisfied with our goods and service.

●We care about our valued customers,and will always try to help you.

●Please give us the opportunity to resolve any problem.We understand the concerns and frustrations you might have,and will try your best to resolve the issues.

●Please email us before leaving any negative feedback or opening any dispute on the site.We will help you to resolve the problem.