For all your Pumping & Process Requirements - Pumps, Tanks, Vessels, Pipe Work etc...
Jabsco Wakeboard and Ski Boat Ballast Pump - 18220-1127
18220-1127 | Puppy
12 Volt D.C
The Ballast Puppy is designed to pump water into Wakeboard Liquid Ballast Tanks and when reversed will also pump water out of them. It has a flow rate of 9 gallons per minute, so it can fill most ballast tanks in about five minutes. It is equipped with a Run-Dry Protection Device (patent pending) to automatically shut-off the pump and protect the impeller from run-dry damage should the pump be mistakenly left on after the Ballast Tank is empty.Features
- Fills a typical 180 litre ballast tank in under 5 minutes
- Reversible to both fill and empty tanks
- Self-priming and non air-locking
- Bronze body, stainless steel shaft
SPECIFICATIONS
| Brand | Jabsco |
| Range | Puppy |
| Connections | 25mm (1”) Bore Hose or ½” BSP |
| Max Flow Rate | 40 LPM | 9 GPM |
| Body Material | Bronze |
| Impeller | Jabsco Polyurethane Compound |
| Seal | Lip Type |
| Amp Draw | 11.5 (amp) |
| Fuse Size | 15 (amp) |
| Weight | 2.7 (kg) 6 (lb) |
| Dimensions | 181mm long, 121mm wide, 92mm high |