* DON'T BUY THIS SWITCH UNLESS YOU EXACTLY KNOW WHAT RESISTANCE YOU NEED *
* Keep in mind, there are two variations (0506 or 07+) depending on what year of your vehicle. Please see the product selection guide below
* Please message me or leave a message what resistances you want. You can choose two resistances.
It comes two noVCMore you chose.
Available options
For 0506 : 82, 91, 102, 110, 124 ohm
For 07+ : 82, 91, 102, 110, 124 ohm
*Message examples: 0506 82 ohm/0506 91 ohm, or 2*07+ 82 ohm
We cannot recommend
what resistance you need because every car has an engine coolant
temperature sensor that has a different internal resistance. This means
you have to figure out what resistance the car needs to deactivate VCM.
If you don't know what you need, we recommend a DIPressor which supports
15 different resistances. You can buy the DIPressor HERE
noVCMore to disable VCM & ECO mode of Honda & Acura 3.5L IVTEC Engine.
Easy installation (Plug & Play).
noVCMore has a single resistance (82, 91, 102, 110 or 124) so you will need another noVCMore that has a different resistance if you need to change the resistance to disable VCM.
Made with high quality automotive grade parts.
Solid construction against vibration & moisture.
Do you need multiple items with a huge discount?
Click one of following links.
For One noVCMores
For Two noVCMores
For Three noVCMores
For Four noVCMores
For Five noVCMores
Same day shipping if payment is cleared before 1 p.m. (EST).
PRODUCT SELECTION GUIDE
Models supported by 05-06 noVCMore
2005-2006 Honda Odyssey
2006-2008 Honda Pilot
Models supported by 07+ noVCMore
2007 & later Honda Odyssey
2009 & later Honda Pilot
2008 & later Honda Accord
2010 & later Honda Crosstour
2017 & later Honda Ridgeline
2013 & later Acura TLX
2013 & later Acura MDX
2013 & later Acura RDX
2013 & later Acura RDL
2019 & later Honda Passport
ELM327 V1.5 Bluetooth OBDII Scanner with PIC18F25K80 chip
It works on Android/Symbian/Windows but doesn't work with iOS devices.
It doesn't support diesel trucks that use 24 voltage.
It supports alll 9 OBDII protocols as follows: (v2.1 scanner supports only 7 protocols)
SAE J1850 PWM (41.6 kbaud)
SAE J1850 VPW (10.4 kbaud)
ISO 9141-2 (5 baud init, 10.4 kbaud)
ISO 14230-4 KWP (5 baud init, 10.4 kbaud)
ISO 14230-4 KWP (fast init, 10.4 kbaud)
ISO 15765-4 CAN (11 bit ID, 500 kbaud)
ISO 15765-4 CAN (29 bit ID, 500 kbaud)
ISO 15765-4 CAN (11 bit ID, 250 kbaud)
ISO 15765-4 CAN (29 bit ID, 250 kbaud)
Bluetooth password: 1234
You mainly use to read or clear an engine code while you install a DIPressor.
However, don't forget that you are also able to read following information from your car.
1.Engine RPM
2.Calculated Load Value
3.Coolant Temperature
4.Fuel System Status
5.Vehicle SpeedV2.1
6.Short Term Fuel Trim
7.Long Term Fuel Trim
8.Intake Manifold Pressure
9.Timing Advance
10.Intake Air Temperature
11.Air Flow Rate
12.Absolute Throttle Position
13.Oxygen sensor voltages/associated short term fuel trims
14.Fuel System status
15.Fuel Pressure
