Sign channel and clip options


Suitable for All Rigid Signs including 3mm PVC, 5mm PVC, Aluminium Dibond, Aluminium and Tin.


Our sign channels come with super adhesive and outdoor quality fixing tape - simply peel off the protective strip and place the channel on the rear of your sign - no rivets/glue/bolts or other unsightly messes.

Sharp Edges are removed so no need to worry about cuts and scrapes.

Choosing the right size clip is easy.
Just measure the width (or diameter if we want to be more technical sounding) of the pole you wish to mount the sign to.
Then choose the clip which suits the size.

Choosing the right size sign channel is even easier
Measure the width of your sign as it would be displayed on the post (this is the horizontal measurement).
Choose the nearest smaller size sign channel.

 Say that again...
e.g. You've got an A3 sign that you want to mount onto a scaffolding pole in the landscape orientation.
Sign measures 420mm wide, pole is 50mm wide.
You'll need a 400mm sign channel with a 40-55mm clip
easy peasy

  • Same as used on UK road signs
  • Fits any post between 40 and 120mm in diameter (for larger posts or fencing see our other listing for the adapter kit)
  • Automatically tightens to the post/railing as the clip is tightened
  • Anti Rotational
  • Stainless Steel Clips & Aluminium Sign Rails



What you will need:
Just the sign and a spanner

Please note, lengths over 1200mm incur a large postage fee and this has been added into the list price of the 1200mm and above lengths to compensate - we apologise for the extra costs but they are unavoidable.

Please contact us if you wish to arrange your own courier for lengths 1200mm and above or would like to collect and we will happily remove the £35 courier fee off the price of the item

Shire Oak Signs & Graphics Ltd
Tel: 01827 715 400
M: 07974 818 191