Brand new kit stator + external ignition coil + flywheel + flywheel puller
The quality exceeds OEM equipment
Direct replacement to your original unit. Plug-and-play, direct fit, easy installation.
All item pictures are accurate
All products shipped are tested
All item pictures are accurate; if in doubt, do not hesitate to compare our item to your original part.
Brand New High Output Aftermarket Stator 200W :For a limited time we are including a FREE Tympanum AC regulator required to run the extra wattage supplied from our 200W stator :
Yamaha YFZ 350 Banshee -- 1995-2006
RM22808
Dimensions Stator :
Interior diameter : 103mm
Exterior diameter : 34mm
Thickness : 27mm
Length of wires stator to grommet : 60mm
Length of wires grommet to plug : 520mm
Length of pickup coil's wire to grommet : 80mm
Other specifications :
Number of wires : 6
Number of plugs : 3
Number of pins : 6
Wire to wire resistance :
Alternator : Yellow to Black = 0.4ohms +/-20%
Pickup : White/Green to White/Red = 115ohms +/-20%
Source : Green to Red = 12ohms +/-20%
Dimensions AC Regulator:
Height: 20 mm
Length: 45 mm
Width: 45 mm
Other specifications:
Number of terminals: 2
Wires length: 130 mm
Before installing your new stator/flywheel
Our stator may use a different wire color code than your original.
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible no less than 0.010".
Check to be sure that all of the following is done to ensure that your AC regulator rectifier is installed properly:
find parts for :