OO9/009 Bagnall Contractors Quarry Locomotive 0-4-0 Narrow Gauge Steam body kit (for TU-KOPPEL chassis loco) A narrow gauge 0-4-0 contractors/quarry locomotive, Bagnall saddle tank style, body kit only, see text/photos for what is included.

£19.99 each + 1st Class postage per order

3D printed resin body kit for mounting on TU-KOPPEL 0-4-0 Chassis - https://www.ebay.co.uk/itm/265634221773 (not included) (these can be purchased here. This is currently Version 7f of this kit, now adjusted for the larger cylinder blocks on the updated chassis. Please check all the photos, and read the text below to know what you are receiving.There are no instructions with the kit, so refer to notes below !

We have a video of a painted loco - https://www.youtube.com/watch?v=ydboEW-lEDE and video of the loco pulling wagons - https://www.youtube.com/watch?v=gTIikZf3K_E

*** Please note that the newer TU-KOPPEL chassis have slightly larger cylinders, with raised rivet detail on top, so the footplate has been adjusted to give clearance, I will update photos in due course. We have noticed further variations in the TU-KOPPEL chassis these tend to make the body slope to the front ! If your kit doesn’t line up – check the coupling height against other stock, you can remove the N Gauge clip as per the photo, and add a little packing to the front.

Dimensions: Max height from rail top: 30mm (chimney – can be lowered), max width: 18mm (footplate), length to end of couplings: 44mm

Parts, supplied UNPAINTED:
1 - Main Body – running plate, cab and couplings
1 - Boiler and Saddle Tank
1 - Chimney
1 - Smoke box door
1 - Custom Driver with hands positioned on regulator and brake
1 - Custom Fireman with shovel and hand on firebox

Photos show all the parts supplied, along with some painted versions - some are earlier prototypes, so have less features/options, e.g. short cab

Chassis and couplings: The TU-KOPPEL 0-4-0 Chassis - https://www.ebay.co.uk/itm/265634221773 (not included, contact us to check stock) push fits in place without any modification *** (see above). The body casting includes the standard OO9 coupling hook. You can of course carefully remove the hook, and drill out for another connector of your choice.

Figures and fittings: The kit includes 2 custom crew, driver and fireman, carefully designed to fit in the small cab area.

Assembly: We strongly recommend adding about 10g of lead inside the boiler/saddle tank before assembly (see photos), the video above shows a loco weighted like this, quite capable of pulling a reasonable load. The weight of course also helps with current pick-up and reducing stalling. We would then recommend fixing the saddle tank to the main body, and fitting the smoke box door and chimney last, so you can check easily for horizontal and vertical alignment. Chimney should be rotated as it is pushed in, this will let it grind into place.

The parts are printed in high-resolution resin, we are currently printing in white, although you may receive another colour, All prints have been cured thoroughly and obvious, but as with all 3D prints, there may be small blemishes to tidy up.

All 3D models can be a little delicate, so don't drop them on the floor ! Also, we recommend any work be done with a file/sandpaper rather than trying to cut, as this is gentler.

We cannot be held responsible for breakage during handling, but if they are damaged in the post, then please provide photographic evidence of packaging etc.

We can often dispatch same day, but allow 2 days. At times there may be a delay if we have to make parts to order.

Lastly, we are always interested in feedback, both on this model, and suggestions for what to work on next.

Our full list of items available via eBay ...
Locos:
OO9 Glyn Steam Tram Loco - https://www.ebay.co.uk/itm/265579154072
OO9 Bagnall Contractors Quarry Loco - https://www.ebay.co.uk/itm/265433293911
OO9 Baguley Drewry RNAD Diesel - https://www.ebay.co.uk/itm/265326635951
OO9 Steam Tram 'Toby' - https://www.ebay.co.uk/itm/265359771947
B11-109S Compatible Chassis for KATO 11-109 - https://www.ebay.co.uk/itm/265728610919
Dummy-109 Chassis - https://www.ebay.co.uk/itm/265342204528
KATO 11-109 Chassis - https://www.ebay.co.uk/itm/265446338185
TU-KOPPEL 0-4-0 Chassis - https://www.ebay.co.uk/itm/265634221773
Rolling stock:
3 off GVT 4 Ton Granite/Mineral Wagons - https://www.ebay.co.uk/itm/265658683485 6 off Talyllyn 2 Bar Slate Wagons - https://www.ebay.co.uk/itm/265533837917 / 3 off Talyllyn 2 Bar Slate Wagons - https://www.ebay.co.uk/itm/265533841555
6 off Penrhyn Wagons - Coal/Flat Ended/Bolster - https://www.ebay.co.uk/itm/265522673189
6 off Tipper Wagons - https://www.ebay.co.uk/itm/265470480645 / 3 off Tipper Wagons - https://www.ebay.co.uk/itm/265470520124
Pair (2) Cattle Wagons/Vans - https://www.ebay.co.uk/itm/265425456807
6 off Ffestiniog 2 Ton Slate Wagons - https://www.ebay.co.uk/itm/265358514663 / 3 off Ffestiniog 2T Slate Wagons - https://www.ebay.co.uk/itm/265364746106

Thank you
Nigel