This is a 3D printed Kit for the Voron Trident.
These are printed in ABS.
These exceed the recommended settings by the Voron team! 0.2mm layer height.
5 Perimeters, 50% Grid Infill, 5 Top Layers, 5 Bottom Layers.
This kit includes every functional part to get your Voron trident up and running.
This kit DOES NOT include non-essential parts such as the skirts, panel mounts and electronics compartments. You can print those yourself once you get your Voron Trident running.
If you need a custom color or custom part send me a message I can do many colors and I do all high temp materials.
Below is the list of every part included:
X-Axis > X-Carriage
- [a] blower housing front
- blower housing rear
- hotend fan mount
- probe retainer bracket
- probe retainer bracket 9mm
- x carriage frame left
- x carriage frame right
X-Axis > XY_Joints
- [a]_endstop_pod_microswitch.stl
- [a]_xy_joint_cable_bridge_3hole.stl
- xy_joint_left_lower_MGN12.stl
- xy_joint_left_upper_MGN12.stl
- xy_joint_right_lower_MGN12.stl
- xy_joint_right_upper_MGN12.stl
Toolheads
- printhead front e3dv6 (Default)
- printhead rear e3dv6 (Default)
- printhead front dragon (Optional)
- printhead rear dragon (Optional)
- printhead front dragonfly BMO (Optional)
- printhead rear dragonfly BMO (Optional)
- printhead front dragonfly BMS (Optional)
- printhead rear dragonfly BMS (Optional)
- printhead front mosquito (Optional)
- printhead rear mosquito (Optional)
Direct Feed
- [a] connector cover
- [a] guidler
- [a] latch
- [a] latch shuttle
- chain anchor 2hole (Optional)
- chain anchor 3hole
- extruder body
- extruder motor plate
Z-Assembly:
- [a] z carriage left
- [a] z carriage right
- [a] z rail stop
- nozzle probe
- z bed left
- z bed rear
- z bed right
- z cable chain mount 2hole (Optional)
- z cable chain mount 3hole
- z carriage left
- z carriage rear 2hole (Optional)
- z carriage rear 3hole
- z carriage right
- z rear extrusion bracket left
- z rear extrusion bracket right
- z stepper left
- z stepper rear
- z stepper right
Spool Holder:
- Bowen retainer
- Spool holder
Gantry > AB Drive Units
- [a] wire cover
- [a] y end stop bumper
- [a] y end stop housing
- a drive frame lower
- a drive frame upper
- b drive frame lower
- b drive frame upper
Gantry > Front Idlers
- [a] tensioner left
- [a] tensioner right
- front idler a
- front idler b
Electronics Bay:
- cable frame anchor x6
- DIN center support x2
- DIN frame mount x4
- LRS PSU bracket x2
- PCB din clip v2 x5
- PSU stabilizer 50mm
- raspberry pi bracket
- RS25 PSU bracket
Thanks for Voron Team's great work once again!! All parts released by the voron team under the GNU General Public License v3.0.