Stator for Gilera Nexus 125 2007-2009 / Nexus 250 2006-2007 / Nexus 300 2008-2011 / Nexus 500 2003-2005 # 638848 58112R

KEY FEATURES
 

Brand new aftermarket 18-Pole Generator Stator

Plug-and-play, direct fit, easy installation

Highest grade copper windings, resistant to 200 degrees Celsius.

All products shipped are tested

DESCRIPTION

 

Battery condition is extremely important. No stator can work correctly with a bad or weak battery. Always fully charge your battery before performing any charging system tests or replacing parts. If there is any doubt, have the battery load tested or replaced.

Brand new aftermarket stator

  • Direct replacement to your original unit
  • Plug-and-play, direct fit, easy installation
  • Highest grade lamination materials
  • Highest grade copper windings, resistant to 200 degrees Celsius.
  • Pick up pulsar coil included
  • Connector included
  • Rubber grommet included
  • All products shipped are tested

All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part.

Vehicle models fitment

 

Gilera Nexus 125 -- 2007-2009
Gilera Nexus 250 -- 2006-2007
Gilera Nexus 300 -- 2008-2011
Gilera Nexus 500 -- 2003-2005

OEM part replacement

 

58202R
58224R
58112R
638848
58070R
AP8176335

Specifications

 

Dimensions :
Interior diameter : 36 mm
Exterior diameter : 95 mm
Thickness : 32 mm
Length of wires stator to grommet : 165 mm
Length of wires grommet to plug : 585 mm / 780 mm
Length of pickup coil's wire to grommet : 88 mm

Other specifications :
Number of wires : 6
Number of plugs : 3
Number of pins : 6
Number of poles : 18

Wire to wire resistance :
Alternator :Yellow between each Yellow = 0.4 ohms +-20%
Pickup : Green/White to Yellow/White = 125 ohms +-20%
Source : Black/Red to Ground = 210 ohms +-20%

instructions

 

Before installing your new stator

  • Check the AC output of the stator
  • Replace any burned or corroded connectors on stator and regulator rectifier
  • Check and repair any melted wiring
  • Use hi-temp dielectric grease on all connectors

Our stator may use a different wire color code than your original.
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible no less than 0.010''.