Direct replacement to your original unit

Plug-and-play, direct fit, easy installation

Rubber grommet included

All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part.

All products shipped are tested

Battery condition is important. No stator can make up for a bad or weak battery. If in doubt charge your battery and have it load tested, or simply replace it. ALWAYS START WITH A FULLY CHARGED BATTERY !

Brand new aftermarket Stator

• Direct replacement to your original unit
• Plug-and-play, direct fit, easy installation
• Connectors included
• Rubber grommet included
• All products shipped are tested

All item pictures are accurate; if in doubt, do not hesitate to compare our item to your original part.

Can-Am Ryker 600 ACE EFI F/C -- 2019-2022
Can-Am Ryker 900 ACE EFI F/C -- 2019-2022

420296913

Dimensions :
Interior diameter : 42 mm
Exterior diameter : 115 mm
Thickness : 21 mm
Length of wires stator to grommet : 145 mm
Length of wires grommet to plug : 580 mm

Other specifications :
Number of wires : 3
Number of plugs : 1
Number of pins : 3
Number of poles : 18

Wire to wire resistance :
Alternator : Yellow to Yellow = 0.5 ohms +-20%

Before installing your new stator

• Check the AC output of the stator
• Replace any burned or corroded connectors on stator and regulator rectifier
• Check and repair any melted wiring
• Use hi-temp dielectric grease on all connectors

Our stator may use a different wire color code than your original.
All the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible no less than 0.010".