SUBZERO TECHNOLOGY: RMSTATOR exclusive stator core architecture & aeronautic-grade components maximize electromagnetic flow which reduce significantly the heat generated by the stator. Our stator run cooler than OEM equivalent for increase longevity.

PRO-FIT SYSTEM: Includes everything required to perform a RMSTATOR-style professional installation: Exact OEM fit, rubber grommet, part connectors & dielectric connector grease.

S3T PRO SYNERGISTIC MANUFACTURING PROCESS: Our stator aren't built from thin air. RMSTATOR unique stator manufacturing process includes OEM specifications mapping, prototypes vigorous testing & 7-step production-ready parts testing on the only stator testing equipment in North America.

PEACECON 2 WARRANTY: We trust our products so much that we are backing them with a stress-free 2-year warranty. Go ride and have fun, RMSTATOR got your back.

VALIDATE FITMENT BEFORE PURCHASE: Check product details to confirm your vehicle fitment. Our images show actual item.

When using this stator on 2016-2018 Polaris Sportsman 570 models, please pay close attention to the stator and regulator wiring harness routing. The OEM wire routing was very poor, and allowed the harness to rub against the motor, damaging the insulation and damaging the charging system. We recommend routing your stator/regulator wiring outside of the frame rail, and securing the harness to the frame with zip ties. This should prevent any future damage to the wiring harness.

Battery condition is extremely important. No stator can work correctly with a bad or weak battery. Always fully charge your battery before performing any charging system tests or replacing parts. If there is any doubt, have the battery load tested or replaced.

There are two possible stators for the RZR XP 900 and RZR 4 XP 900 models. This stator fits models built 3/16/12 and after (OEM# 4013013, stator thickness 19 mm). For the stator built 3/15/12 and before, the right part is RM01205 (OEM# 4013224, stator thickness 27 mm). Always check in the 'Fits models' section and please compare to your original part before buying.

Brand new aftermarket stator

• Direct replacement to your original unit
• Plug-and-play, direct fit, easy installation.
• Highest grade of lamination materials
• Highest grade of copper winding, resistant to 200 degrees Celsius.
• Connector included
• Rubber grommet included
• All product shipped are tested

All item pictures are accurate; if in doubt, do not hesitate to compare our item to your original part.

Polaris General 1000 -- 2016-2023
Polaris General 1000 XP -- 2021-2023
Polaris General 1000 XP4 -- 2021-2023
Polaris General 4 1000 -- 2017-2022
Polaris Ranger 1000 Full Size -- 2023
Polaris Ranger 1000 XP -- 2017, 2023
Polaris Ranger 1000 XP High Lifter Edition -- 2018
Polaris Ranger 325 ETX EFI -- 2015
Polaris Ranger 325 ETX EFI -- 2016
Polaris Ranger 500 EFI -- 2017-2022
Polaris Ranger 500 ETX EFI -- 2017
Polaris Ranger 570 EFI -- 2014-2023
Polaris Ranger 570 XP -- 2016
Polaris Ranger 900 -- 2017-2018
Polaris Ranger 900 XP -- 2013-2019
Polaris Ranger Crew 1000 XP -- 2017-2018
Polaris Ranger Crew 570 EFI -- 2014-2020
Polaris Ranger Crew 570 Full Size -- 2015, 2021-2023
Polaris Ranger Crew 900 -- 2014-2017
Polaris Ranger Crew 900 XP -- 2017-2019
Polaris RZR 1000 -- 2016-2021
Polaris RZR 1000 RS1 EFI F/C -- 2018-2022
Polaris RZR 1000 Trail S -- 2022-2023
Polaris RZR 1000 XP -- 2014, 2016-2024
Polaris RZR 1000 XP INTL -- 2014-2015
Polaris RZR 1000 XP Turbo -- 2020-2021
Polaris RZR 4 1000 XP -- 2014-2024
Polaris RZR 4 900 -- 2014-2018
Polaris RZR 4 900 INTL -- 2013-2014
Polaris RZR 4 900 XP -- 2012-2013, 2015
Polaris RZR 4 900 XP Turbo -- 2016-2021
Polaris RZR 570 EFI -- 2012-2020
Polaris RZR 570 EPS -- 2013, 2015-2016
Polaris RZR 570 S -- 2017
Polaris RZR 570 Trail -- 2021-2022
Polaris RZR 900 -- 2014-2021
Polaris RZR 900 INTL -- 2014-2015
Polaris RZR 900 S -- 2015-2017, 2020
Polaris RZR 900 Trail -- 2022-2023
Polaris RZR 900 XP -- 2012-2013
Polaris RZR 900 XP Turbo -- 2016-2020
Polaris RZR 900 XP Turbo S -- 2021
Polaris RZR Turbo R 4 -- 2020-2021

4013970
4015340
4015292
4013990
4013013
4014839
4014406
4014402

Dimensions :
Interior diameter : 54 mm
Exterior diameter : 126 mm
Thickness : 19 mm
Length of wires stator to grommet : 85 mm
Length of wires grommet to plug : 290 mm

Other specifications :
Number of wires : 3
Number of plugs : 1
Number of pins : 3

Wire to wire resistance :
Alternator : Between each Black = 0.4 ohms +/-20%

Before installing your new stator

• Check the AC output of the stator.
• Replace any burned or corroded connectors on stator and regulator/rectifier
• Check and repair any melted wiring.
• Use hi-temp dielectric grease on all connectors

Our stator may use a different wire color code than your original.
All the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible no less than 0.010".