Brand Magneto Flywheel + Stator Kit
Direct replacement to your original unit. Plug-and-play, direct fit, easy installation.
Highest grade copper windings, resistant to 200 degrees Celsius.
All products shipped are tested
All item pictures are accurate; if in doubt, do not hesitate to compare our item to your original part.
Ski-doo Tundra 280 II Carb F/C -- 1998
Ski-doo Tundra 280 R Carb F/C -- 1998-2000, 2002-2005
RM22869-R00
Stator
Dimensions :
Interior diameter : 43 mm
Exterior diameter : 110 mm
Thickness : 32 mm
Length of wires stator to grommet : 500mm
Other specifications :
Number of wires : 6
Number of plugs : 2
Number of pins : 6
Wire to wire resistance :
Alternator : Yellow to Yellow = 0.4 ohms +/-20%
Alternator : Yellow to Ground = 0.L
Source : Red to Black = 80 ohms +/-20%
Flywheel
Dimensions:
Exterior Diameter: 117 mm
Interior Diameter: 96 mm
Interior Diameter Center Housing: 24 mm
Exterior Diameter Center Housing: 35 mm
Thickness (exterior): 46 mm
Thickness (interior): 23 mm
Before installing your new stator
Our stator may use a different wire color code than your original.
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible no less than 0.010??.
Before attempting to start your Ski Doo Tundra 300 R, adjusting the air gap is necessary. Rotate the flywheel so the raised node is lined up with the pick up/pulser coil and adjust as close as possible but no less than 0.010??.
find parts for :