Direct replacement to your original unit
Plug-and-play, direct fit, easy installation
Highest grade lamination materials
All products shipped are tested
Battery condition is extremely important. No stator can work correctly with a bad or weak battery. Always fully charge your battery before performing any charging system tests or replacing parts. If there is any doubt, have the battery load tested or replaced.
All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part.
Honda VFR 800 Interceptor -- 2002-2009
31100-MCW-315
31100-MCW-325
31120-MCW-D01
31120-MCW-D02
31120-MCW-D03
Dimensions :
Interior diameter : 40mm
Exterior diameter : 114mm
Thickness : 20mm
Length of wires stator to grommet : 90mm
Length of wires grommet to plug : 600mm
Length of pickup coil's wire to grommet : N/A
Other specifications :
Number of wires : 3
Number of plugs : 1
Number of pins : 3
Wire to wire resistance :
Alternator : Black between each Black = 0.4 ohms +/-20%
Before installing your new stator
Our stator may use a different wire color code than your original.
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible no less than 0.010??.
find parts for :