Brand new generator stator direct replacement
Highest grade lamination materials
Direct plug and play
All products shipped are tested
Battery condition is extremely important. No stator can work correctly with a bad or weak battery. Always fully charge your battery before performing any charging system tests or replacing parts. If there is any doubt, have the battery load tested or replaced.
We have even included the opposite connector (main harness side) as we know these are often melted/corroded/defective and a major cause for repetitive electrical issues.
All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part.
Yamaha 212 SS -- 2008-2010
Yamaha 212 X -- 2008-2010
Yamaha 232 Limited -- 2008-2009
Yamaha 232 Limited S -- 2009
Yamaha AR 230 -- 2004-2006
Yamaha AR 230 HO -- 2005-2009
Yamaha SR 230 -- 2003-2005
Yamaha SR 230 HO -- 2007
Yamaha SX 230 -- 2004-2006
Yamaha SX 230 HO -- 2005-2009
Yamaha Waverunner FX 1000 -- 2005-2008
Yamaha Waverunner FX 1000 Cruiser -- 2003-2008
Yamaha Waverunner FX 1000 FX 140 -- 2002-2004
Yamaha Waverunner FX 1100 Cruiser HO -- 2004-2008
Yamaha Waverunner FX 1100 HO -- 2004-2008
60E-81410-00-00
60E-81410-01-00
Dimensions :
Interior diameter: 42 mm
Exterior diameter: 104 mm
Thickness: 22 mm
Length of wires stator to grommet: 90 mm
Length of wires grommet to plug: 450 mm
Length of pickup coil wire 1 to grommet: 280 mm
Length of pickup coil wire 2 to grommet: 125 mm
Other specifications :
Number of wires: 6
Number of plugs: 2
Number of pins: 6
Wire to wire resistance:
Alternator: Green between each Green = 0.9 ohms +/-20%
Pickup 1: White to Black = 518 ohms +/-20%
Pickup 2: Red to Black = 524 ohms +/-20%
Before installing your new stator
Our stator may use a different wire color code than your original.
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible no less than 0.010".
find parts for :