DC12-24V Single Color LED Light Strip Dimmer Wireless Remote Controller Dimmer
Control the brightness of single color LED strip lighting. The terminal connectors and mounting holes make this a great option for permanent installation.
This product use infrared remote control, can adjust the brightness of the remote control, can set the delay shutdown, with memory cut function, no need to setting so often.
Product Parameter:
input/output voltage: DC12-24V
maximum current output: 30A
Maximum single machine load: 360W
Control distance: 8-10 meters
Gross Weight: 135g
Net Weight: 110g
Product size: 82*62*20 mm
Package size: 120*75*50mm
Use range: 100ft / 30m single colorstrip
Features:
1. RF 23 Keys 30A Knob LED Dimmer: Wireless control or though the knob to adjust brightness 0%-100% to meet your different needs and preferences.(Even if the remote control is lost, the brightness can be adjusted with the knob on the dimming controller.)
2. Flexible Usage: Compatible with DC 12V-24V MAX 30A LED light application, single channel dimming controller for single color 5050 3528 5630 LED strip lights.
3. Long Lasting and Durable: The high quality, sturdy aluminum housing provides excellent anti-corrosion and heat-dissipation capacity, and ensures a long-lasting performance even in harsh environments.
4. Esay to Connect: The screw-in input and output terminals, pre-drilled mounting holes make the installation literally a breeze.
5. Note: If the input end and the output end are connected reversely, the light is always on, and the remote control and the LED dimmer have no function.
Instructions
1. The positive and negative of the controller and the light bar should be corresponding, and check
whether there is a short circuit in the position of the pin. lf there is ashort circuit phenomenon, pleasehandle the electricity again, otherwise it will damage the controller and the lamp strip.
2. The power plug is plugged in, and the controller can be operated according to the need
3. When installing the controller, the remote receiver should be installed in the position without obstacles
to avoid remote control failure.
Remote control function mode list
1. ON/OFF
2. SPEED-/SPEED+
3. LINGHT: Brightness is the brightest.
4. adjust brightness
5. MODE+/MODE:-8 dynamic mode selection.
6. 10%-100%: Brightness choosing
7. Time 5-60: timed shutdown
Match code:
The dimmer will press the power button within 3 seconds after connecting to the power supply. The flash of white light indicates that the code matching is successful
Attention:
1. The voltage of this product is DC12-24V don't use other voltages.
2.The warranty period of this product is one year, and it is not covered by the warranty due to the improper operation of the product.
This product use infrared remote control, can adjust the brightness of the remote control, can set the delay shutdown, with memory cut function, no need to setting so often.
Product Parameter:
input/output voltage: DC12-24V
maximum current output: 30A
Maximum single machine load: 360W
Control distance: 8-10 meters
Gross Weight: 135g
Net Weight: 110g
Product size: 82*62*20 mm
Package size: 120*75*50mm
Use range: 100ft / 30m single colorstrip
Features:
1. RF 23 Keys 30A Knob LED Dimmer: Wireless control or though the knob to adjust brightness 0%-100% to meet your different needs and preferences.(Even if the remote control is lost, the brightness can be adjusted with the knob on the dimming controller.)
2. Flexible Usage: Compatible with DC 12V-24V MAX 30A LED light application, single channel dimming controller for single color 5050 3528 5630 LED strip lights.
3. Long Lasting and Durable: The high quality, sturdy aluminum housing provides excellent anti-corrosion and heat-dissipation capacity, and ensures a long-lasting performance even in harsh environments.
4. Esay to Connect: The screw-in input and output terminals, pre-drilled mounting holes make the installation literally a breeze.
5. Note: If the input end and the output end are connected reversely, the light is always on, and the remote control and the LED dimmer have no function.
Instructions
1. The positive and negative of the controller and the light bar should be corresponding, and check
whether there is a short circuit in the position of the pin. lf there is ashort circuit phenomenon, pleasehandle the electricity again, otherwise it will damage the controller and the lamp strip.
2. The power plug is plugged in, and the controller can be operated according to the need
3. When installing the controller, the remote receiver should be installed in the position without obstacles
to avoid remote control failure.
Remote control function mode list
1. ON/OFF
2. SPEED-/SPEED+
3. LINGHT: Brightness is the brightest.
4. adjust brightness
5. MODE+/MODE:-8 dynamic mode selection.
6. 10%-100%: Brightness choosing
7. Time 5-60: timed shutdown
Match code:
The dimmer will press the power button within 3 seconds after connecting to the power supply. The flash of white light indicates that the code matching is successful
Attention:
1. The voltage of this product is DC12-24V don't use other voltages.
2.The warranty period of this product is one year, and it is not covered by the warranty due to the improper operation of the product.