Your Satisfaction Is Our Destination

Xiegu VG4 7.5M 4-Band Base Station Vertical Antenna | for HF Transceiver

Description

Xiegu VG4 antenna is a 4-band GP type and is made of aluminum alloy with anti-oxidation surface. It is light, solid, and easy to install. It is with good outdoor weather ability. After the normal installation without needing extra guying, it can resist Category One Hurricane.

Features:

4-Band Vertical Antenna: The VG4 is a 4-band Ground Plane type antenna made of aluminum alloy with an anti-oxidation coating. It covers 40/20/15/10 meters. The user trims the antenna to the part of the band as needed.

Automatic band switching: The antenna has a single coax cable feed however each band is individually tuned with a low VSWR across the band. Through fine-tuning, the best (rock-bottom) SWR can be achieved on the user’s choice of frequency within the band. The band selection is 100% automatic through the single feed, just switch bands on the radio.

No extra ground peg or radials are needed: The antenna has its own effective counterpoise replacing the need for radial wires.

Physical: This antenna is light, but built to last and is easy to install. Suitable even for homes with only a small space available. It is perfect for roof, patio, small backyard, condo and motorhome installation.

Top loading: Parallel resonators are used to give the best vertical-element efficiency. End loading of the lower HF band sections (capacitive hats) allow efficient operation with a reduced antenna height.

Outdoor weather ability: The VG4 is rated for high wind environments. After a normal installation, it can resist a category one hurricane with no guying required.
　

Specifications:

Use frequency band: 7/14/21/28MHz (40m/20m/15m/10m)
Axial length: about 7.8m | 25.6ft
Radial length: about 2.7m | 8.8ft
Maximum power handling: 1000W PEP (CW500W, RTTY300W)
Antenna impedance: 50Ω
VSWR：＜1.5:1
Antenna bandwidth: 40m: 150kHz / 20m: 450kHz / 15m: 800kHz / 10m: 1000kHz
Rated wind speed: 35 m/s
Antenna interface type: SL16-K
Weight: about 7.0kg | 15.4lb
Package size: 13x13x120cm | 0.4x0.4x3.9ft
Erection height: the distance from the ground is more than 3m (10ft)
　

Installation Instruction:


A. Match and plug in the components in order.
B. Secure the components with screws and spanners.
C. Twist the capacitor cap/ the main counterpoises into the corresponding position.
D. Fix the main pole with a U-shaped holding clamp and a fixing plate.
E. Install the matching box.

Note:

1. The antenna can be installed either on a stable ground supported mast or using a wall mount secured using expansion bolts. The installation clearance above the ground should be greater than 3 meters (10ft).
2. The antenna installation environment shall be as open as possible and away from some important equipment & facilities, power transmission & transformation equipment, medical equipment and other sensitive electronic instruments or equipment, and public radio & television tower or other high-power radio transmission antenna system.
3. When mounting on a tall mast or roof please take appropriate measures for lightning protection and grounding.
4. After the antenna test is completed, it is recommended to apply waterproof and UV resistant silicone rubber at the antenna feeder joint, to wrap the whole connection
part.
5. As long as the surrounding environment is safe, it is not required to use any guy ropes.
6. In extreme weather conditions, it is recommended to take down the antenna in advance of the storm arriving if possible.

PS: The VG4 antenna can be adjusted to any band center frequency that you wish. During the configuration step, adjustment of the higher frequency bands will affect all of the lower frequency band settings. The adjustment of lower frequency bands will not however affect the higher frequency band settings. Therefore, the adjustment sequence is, as shown above, to adjust from the 10m band to the 40m band. Generally speaking, only the 40m frequency band will need adjustment.

　

What's in the box?

1 x Main support (450*46*4mm | 1.5*0.15*0.01ft)
6 x Main counterpoise (1200mm | 3.9ft)
1 x Antenna body NO:1 (1200*33*3mm | 3.9*0.1*0.01ft)
1 x Antenna body NO:2 (1200*29.5*26mm | 3.9*0.1*0.08ft)
1 x Antenna body NO:3 (1200*26*23mm | 3.9*0.08*0.1ft)
1 x Antenna body NO:4 (10m Notch filter)
1 x Antenna body NO:5 (245*26*23mm | 0.8*0.08*0.07ft)
1 x Antenna body NO:6 (10m Notch filter)
1 x Antenna body NO:7 (325*26*23mm | 1*0.08*0.07ft)
1 x Antenna body NO:8 (20m Notch filter)
1 x Antenna body NO:9 (1200*12.8*10.5mm | 3.9*0.04*0.03ft)
1 x Antenna body NO:10 (1200*10*8m | 3.9* 0.03*0.03ft)
2 x 20m capacitor cap (500mm | 1.6ft)
4 x 40m capacitor cap (1200mm | 3.9ft)
1 x Matching box
1 x Main support set plate
4 x U clamp
1 x 7# sleeve
1 x 10# wrench
1 x 13# wrench
1 x M4 Allen wrench

Polices

  1. Item will be shipped within 3 working day after full payment is received. Tracking No. will be sent to all customers upon package shipment.
  2. For Domestic shipping, our Shipping Method refers to Standard Shipping(3-5) business days(weekends excluded).
    Please check the 'Estimated Delivery' to know item delivery time.
  3. Delivery time depends on destination, logistics mode and other factors. If you have not received your shipment within 30 days, please contact us. We will track the shipment and get back to you as soon as possible. Customer's satisfaction is our goal.
  4. Just kindly reminding that according to eBay policy, we will not cover the Customs duty and VAT fee. (No such issues for USA)
  1. We accept payment via PAYPAL ONLY which provides full-scale buyer protection policy up to $500. We only ship to confirmed PAYPAL addresses. Please make sure payment address in PayPal is correct.
  2. All major credit cards are accepted through our secure payment processor PayPal.
  3. Payment must be received within 7 business days of auction closing.
  1. 30 day money back return policy. If you are not satisfied when you receive your item, please return it within 30 days for a replacement or money back. Please contact us for return address before you send it back.
  2. If item defective
    in 3 monthswe will send you a replacement without extra charge, or offer refund upon faulty received.
    after 3 monthsyou are still welcomed to send it back to us for exchang
    Buyer may responsible for all return shipping costs.
  3. In case you receive wrong products due to shipping error, please contact us for exchange or refund. If it's damaged, please refuse to accept and contact us as soon as possible.
  1. 12 months Manufacturer's Warranty.
  2. We guarantee 100% customer satisfaction. If your item is not as described or faulty when you receive it we will replace it for you with no additional charge.
Please note that DUTY RATE is different from each country. You can check it exactly from local Customs Department. According to Ebay Policy, it is buyer's responsibility for the duty once it produces. We do fully understand your concerns about the tariff during cross-border transaction. No problem we are happy to declare the package as lower value for you, which is the most we can do for you. Thank you for your understanding.

If you have the following issues,
please click to get your problems solved:

On Apr 9, 2024 at 07:42:24 PDT, seller added the following information:

DataCaciques