Upper and lower jaws of a huge African lion are cast in durable urethane resin. Jaw measurements: width = 6 3/8" (overall) 5.5" across the rear molars, width across the front of the jaw (at the canines, overall width) 4 1/4", 4" across the canines. length = 7" overall length, 6" as measured across the upper incisors to the last rear molar tooth. Bottom jaw = 6 1/8" overall length, 5 5/8" incisor to last molar. Width = 4.5 overall, 4" across rear molars. Width at canines - 2 1/2 (overall and canines). The mold was taken directly from a real skull, a large male lion that had the biggest teeth I've ever seen on a lion skull. This cast is detailed down to the pores and texture of the bone. This has been re-molded to have cleaner lines at the base and the lower jaw is a solid piece for better stability (and a place to attach a tongue, if you are going to paint and finish it). Please note - the cast has been filled with yellow urethane foam for added stability; this can easily be trimmed and shaped as desired. It also readily accepts hot glue. These casts are also paintable - however you will need to lightly scuff the surface with a steel wool or scouring pad in order to get good paint adhesion. I got good results with scuffing, wiping with denatured alcohol and then priming with the spray can automotive-type primer available in stores. Then it can be painted with virtually any type of paint.
I gladly welcome questions; feel free to ask before you buy.