TANK CURE 450 Grm Fuel Tank Sealant-up to 15 litre tank "TANK CURE" products enable you to recondition the inside of your fueltank in a professional way. "TANK CURE" is manufactured by Poly Service BV Netherlands.This petrol resistant Tank Sealant is adopted on a large scale in The Netherlands, What can you achieve with our Tank Sealant? cure rusted tanks stop leakage through seams and pinholes preventive treatment against leaking seams, pinholes and the build up of rust shield off pollution in oil tanks (after sandblasting)
Before you apply the sealant the tank should be absolutely dry, free of grease and almost free of rust. It is strongly recommended to use our TANK CURE CLEANER and TANK CURE RUST REMOVER according to our user guidelines to guarantee a good result. These products are extensively tested in combination with our Tank Sealant. If the tank has an old sealant this must be removed. We stock EPOXY RESIN REMOVER . These items are available separately, or as as part of a Kit, please see our other Items in our shop for more Details "TANK CURE" tank sealant is based on a 2 component epoxy resin. After adding the two components together stir them thoroughly for a couple of minutes, empty the can in your petrol tank and seal the filler opening properly. Now slowly turn the tank in all directions. Keep turning for about 15 to 20 minutes. The sealant should touch all surfaces several times to form a good layer. Now open the filler cap and put the tank upside down to drain as much sealant as possible. You will find several products on the market to treat petrol tanks. Whatever product you are going to use: It is very important to apply sufficient sealant to cover the inside of your tank completely. Being unable to look inside the tank during the sealing process you have to stay on the safe side. Experience shows that you will need approx 450 grams for a 15 to 20 litre petrol tank.
"TANK CURE" supplies two standard packages of sealant. A 450 grm. package for motorcycle tanks up to 15/20 litres and a 600 grm. package for larger M/Cycle tanks and small car tanks The item in this Auction is the TANK CURE 450grm Sealant NOT a kit. IMPORTANT With effect from the 1st July 2013 we can no longer send this item by Royal Mail as it is classified by them as " Dangerous Goods ".We can only send by a Private Carrier with the resultant higher cost of carriage. Please note we cannot send this product to the Highlands and Islands of Scotland or any offshore or overseas location including Ireland (North and South ).
Tank cure products enable you to recondition the inside of your fuel tank in a professional way. It has been successfully applied to steel and aluminium but not suitable for polyster and carbon fibre tanks (or similar ).It is safe against Ethanol level of 10% Including Rust Remover and Cleaner.-£42.00. |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
This kit is Recomended for most Motorbike Tanks (3-4 Gallons) | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Important With effect from 1st July 2013 we can no longer send this item by Royal Mail as it is classified by them as "Dangerous Goods ".We can only use a Private Carrier with the resultant higher cost of carriage. Please note we cannot send this product to the Highlands and Islands of Scotland or any offshore location including Ireland (North and South ) `
|