Module introduction:
Operating voltage: 4.5-5.5V (input) VCC: positive GND: negative
Output mode: power-on default output low, press the remote control button output high, OUT1-OUT4, 4-way output
Maximum output current: maximum output current of 10MA or less
Static working current: 3mA
Receiver size: 20 * 30 * 6
Module Type: 433M learning wireless receiver module
Receiving distance: 15-50 meters
Working mode: self-locking, jogging, interlocking three kinds of work module customers free to set
Working instructions: D1 (learning indicator and receive signal indicator)
Output Level: The output high level is equal to or slightly less than the VCC voltage (note the level and voltage are completely different)
First, learning methods:
A. After the power is on, press the learning button, the learning indicator will flash for 1 time, the first channel will trigger successfully, then press the remote controller button to learn, the learning indicator will flash for 2 times, the first one will learn successfully
B. After power on, press the learning button, the learning indicator will flash 2 times, the 2nd channel will trigger successfully, and then press the remote controller button to learn, the learning indicator will flash 2 times, the second way will be learned successfully
C, power, press the learning button, the learning indicator flashes three times, the third channel triggered successfully, and then press the remote control button to learn, learning indicator flashes 2 times, the third successful learning
D, power, press the learning button, the learning light flashes 4 times, the first 4 channels trigger success, and then press the remote control button to learn, learning indicator flashes 2 times, the fourth successful learning
E, the removal method: power state, press and hold the learning button, and then powered on, learn indicator light flashes 4 times, the module is cleared successfully
Second, self-locking jog interlock function conversion operation
Interlock: In the power-off state, press and hold the learning key and then power on. The learning indicator flashes once and the button is released. At this time, the interlock output is set. (Press the remote control button, the module corresponding channel output all other channels closed without output)
Self-locking: In the power-off state, press and hold the learning key and power on, learning indicator flashes twice, release the key, then set to self-locking output. (Press the remote control button, the corresponding output channel of the module will not affect the status of other channels, release the output status of the remote control)
Jog: In the power-off state, press and hold the learning button and then power on, learning indicator flashes 3 times, release the button, then set to jog output (press the remote control button, the module corresponding channel output, release Remote control output stop)
Package include:
2 x New 4CH RF 433MHz Wireless Receiver Module
2 x 4 KEY remote control
the remote control baord us the CR2035 battery,not include.
(Note: First of all, please solder the antenna, otherwise it will affect the receiving distance, the antenna is soldered to the rightmost pad beside the 8-pin IC)