Lithium-Ion Lithium-Polymer Rechargeable Battery Lipo Protection Board BMS

Description:
This Board is used to protect lithium cells from Full Discharge, Over-Charging, Over-current and Short Circuit
Suitable for Lithium Batteries with nominal voltage of 3.6V, 3.7V, 3.8V and charge up to 4.2V per cell
Need basic soldering skills to wire the board
Input voltage: 8.4V regulated from Constant Current and Constant Voltage

Voltage source
Voltage: 8.4V DC
Overcharge protection
Overcharge detection voltage: 4.28 V +- 0.025V
Overcharge detection delay time: 150-500 ms
Overcharge recovery voltage: 4.075V +- 0.025V

Over-discharge protection
Overdischarge detection voltage: 2.90V +- 0.1V
Over discharge detection delay time: 50-150ms
Over-discharge recovery voltage: 3.0V +- 0.10V
Overcurrent protection
Overcurrent detection voltage: 150 +- 30mv
Over current detection current: 2.5 +- 0.5A
Overcurrent detection delay time: 5ms-15ms

Restore state: Automatic recovery
Short circuit protection
Detection Status: External short circuit
Detection delay time: <=50us
Restore state: Automatic recovery
Protection lines (MOS-FET): <=60m(omega)
Operating temperature range: -40C to 50C
Storage temperature range: -40C to 90C

Welding points:
B+ : Battery Positive
B- : Battery Negative
P+ : Charger/Load Positive
P- : Charger/Load Negative
MB : To the bridge between the first and second cell