eBay

868MHz/915MHz RFID IOT Receiver Remote Control SAW Bandpass Filter 1dB 4MHz Bandwidth with SMA Connector for Radio Amplifiers

SMA-M means male connector
SMA-F means female connector

868MHz filter:

The 1dB bandwidth of this filter is 4MHz, optimized for the performance of 868MHz RFID receivers, standard LoRa IoT node devices
European, which can effectively filter out-of-band signals, reduce noise, and increase dynamic range.

Model: FBP-868s
Impedance: 50 Ohms
Center Frequency: 868MHz
Passband (1dB bandwidth): 866 to 870 MHz
Band insertion loss: <3.5 dB
Maximum load power: 100 mW (20 dBm)
Interface: SMA-M, SMA-F

915MHz filter:
This filter has a 26MHz 1dB bandwidth and is optimized for use in 915MHz RFID receivers to effectively filter out-of-band signals, reduce noise and increase dynamic range.

Model: FBP-915s
Impedance: 50 Ohms
Center Frequency: 915MHz
1dB pass band: 902 to 928 MHz
Band insertion loss: <= 2.0 dB
Maximum load power: 100 mW (20 dBm)
Interface: SMA-M, SMA-F

1090MHz filter:
This filter guarantees an access bandwidth of 30MHz with low insertion loss. Optimized for performance on 1090MHz ADS-B receivers,
Effectively filters out-of-band signals, reduces noise and increases dynamic range. The device is ultra-small and easy to use.
Model: FBP-1090s

Impedance: 50 Ohms
Center Frequency: 1090MHz
Bandwidth (1 dB bandwidth): 30 MHz
30dB Bandwidth: <80MHz
Band insertion loss: 1.7 to 2.2 dB
Maximum load power: 100 mW (20 dBm)
Interface: SMA-M, SMA-F

5.8G filter:
This filter has a center frequency of 5750MHz and a 3dB bandwidth of about 600MHz, and is a film circuit structure
fine multi-layer It is used for interference resistance and performance optimization of 5.8G wisax, WiFi and other wireless system receiving devices. It can effectively filter out-of-band signals, reduce noise, and increase dynamic range.
Model: FBP-5800
Impedance: 50 Ohms
Center Frequency: 5750MHz
3 dB band: 5450 ~ 6100 MHz
Insertion Loss: <2.5dB @ 5100~6050MHz
Maximum load power: 5 W (37 dBm)
Interface: SMA-M, SMA-F (symmetrical RF characteristics at both ends, non-directional)

400-475MHz filter:
The characteristics
Ultra-small size, low insertion loss, excellent selectivity, high out-of-band rejection, great power handling.
The applications
400 ~ 475 MHz (433.92 MHz, 435MHz) Dedicated VTX receiver, laboratory and other highly selective applications.
Model: FBP-433
Impedance: 50 Ohms
Center Frequency: 433MHz
Center Frequency Insertion Loss: <= 3.5 dB @ 433 MHz
3 dB bandwidth: 390 to 470 MHz
30 dB bandwidth: 350 to 560 MHz
Impedance band greater than 50 dB: DC ~ 250 MHz and 1100 ~ 2500 MHz
Maximum load power: 10W (40dBm)
Interface: SMA-M, SMA-F

2.4G 2440MHz filter:
This filter has a bandwidth of 80MHz and is used to optimize the performance of 2.4GHz receivers and to prevent WiFi interference,
systems compatible with Bluetooth and Zigbee. Which can effectively filter out-of-band signals, reduce noise and increase dynamic range.

Model: FBP-2440s
Impedance: 50 Ohms
Center Frequency: 2440MHz
Spurious: 2400 ~ 2480 MHz
Band insertion loss: <3.5 dB
Maximum load power: 10mW (10dBm)
Interface: SMA-M, SMA-F

144MHz filter:
The characteristics
Ultra-small size, excellent selectivity, high out-of-band rejection.
The applications
144MHz for communication receivers, for HAM 2m band, laboratory and other high selectivity applications.
Model: FBP-144
Impedance: 50 Ohms
Center Frequency: 144MHz
Center Frequency Insertion Loss: 2.5 to 3.0 dB @ 144 MHz
3 dB bandwidth: 127 to 157 MHz
30 dB bandwidth: 105 to 200 MHz
Impedance band greater than 50 dB: DC ~ 85 MHz and 300 ~ 1400 MHz
Maximum load power: 3 W (35 dBm)
Interface: SMA-M, SMA-F

915(890-970)MHz filter:
The characteristics
Ultra-small size, low insertion loss, excellent selectivity, high out-of-band rejection, great power handling.
The applications
Dedicated 890-970 MHz VTX receiver, laboratory and other highly selective applications.
Model: FBP-915
Impedance: 50 Ohms
Center Frequency: 935MHz
Center Frequency Insertion Loss: 2.3 to 2.8 dB @ 915 MHz
3 dB bandwidth: 890 to 970 MHz
30 dB bandwidth: 780 to 1070 MHz
Impedance band greater than 50 dB: DC ~ 500 MHz
Maximum load power: 10W (40dBm)
Interface: SMA-M, SMA-F

900MHz filter:
This product is a narrow band low noise RF amplifier, the product covers 10MHz ~ 2.4GHz frequency band. It can improve the sensitivity
receiver and reduce system noise. This product has a strong aluminum protective shell, anti-electromagnetic interference, shape
compact, can be directly inserted into the original antenna system to use. (Note: This product is not waterproof, waterproof treatment needs to be done for outdoor use.)
Model: AMP-900
Impedance: 50 Ohms
Noise factor: <= 2.5dB
Center Frequency Gain: >= 20 dB @ 850 ~ 950 MHz (Typical Value: 20 ~ 22 dB
Input reflection loss: > 15 dB @ 900 MHz
Supply voltage: + 5 VDC
Operating current: 15 to 20mA
Maximum input power: < 0 dBm
P1dBm: ≈ 6dBm

403MHz filter:
This filter has a low insertion loss in band and is designed to optimize the performance of 403 MHz satellite reception equipment.
It can effectively filter out-of-band signals, reduce noise, and increase dynamic range. This product has an ultra-thin PCB board on the
inside, which still has excellent suppression ability for far out-of-band signals, and its performance is much better than those of
products made of bare PCB board; Uses an aluminum alloy protective shell, which is anti-interference, has no false feedback outside
band, compact, resistant and easy to use.

Model: FBP-403s
Impedance: 50 Ohms
Center Frequency: 403MHz
1dB pass band: 401-405 MHz
Insertion Loss: < 2.5dB @ 401 ~ 405 MHz
Maximum load power: 100mW (20 dBm)

870MHz filter:
The characteristics
Ultra-small size, low insertion loss, excellent selectivity, high out-of-band rejection, great power handling.
The applications
GSM mobile test systems, RFID communication systems, laboratories and other highly selective applications.
Model: FBP-870
Impedance: 50 Ohms
Center Frequency: 870MHz
Center Frequency Insertion Loss: 2.5 to 3.0 dB @ 870 MHz
3dB Bandwidth: 825 to 920MHz
30 dB bandwidth: 740 to 1000 MHz
Impedance band greater than 50 dB: DC ~ 650 MHz and 1150 ~ 2200 MHz
Maximum load power: 10W (40dBm)
Interface: SMA-M, SMA-F